Lozenge Alabaster Rod Pendant Lamp
VKC4-26922-01
- In stock, ready to ship
The Lozenge Alabaster Rod Pendant hangs a capsule (pill-shaped) natural alabaster shade from a rigid metal rod in a dark bronze finish — a domed metal cap tops the stone, joined by a small sphere, with a tiny finial beneath. The shade is closed at the bottom, so the light glows outward through the stone rather than shining straight down. It's available as a single pendant, or as a multi-rod cluster of 3, 5, 7, 9, or 11 capsules on a round ceiling plate, with each rod pre-cut to a different, staggered length. The metal hardware is offered in a single finish: Dark Bronze.
Capsule alabaster shade
A pill-shaped natural alabaster capsule, closed at the bottom, glows softly outward through the stone rather than casting light straight down.
Rigid rod, sphere joint & finial
A domed metal cap tops the stone and joins a rigid metal rod through a small sphere, with a tiny finial hanging beneath — the rod is pre-cut to length and does not adjust after installation.
Single or staggered multi-rod cluster
Available as a single pendant, or as a 3, 5, 7, 9, or 11-capsule cluster on a round ceiling plate, with each rod cut to a different, staggered length.
Single
One capsule shade, Φ15 × H35 cm / ∅5.9″ × H13.8″. Rod length for the single configuration wasn't specified in the source.
3-Light Cluster
Three capsule shades on staggered rods from a Φ30 cm / ∅11.8″ round ceiling plate, overall drop 150 cm / 59.1″.
5-Light Cluster
Five capsule shades on staggered rods from a Φ35 cm / ∅13.8″ round ceiling plate, overall drop 200 cm / 78.7″.
7-Light Cluster
Seven capsule shades on staggered rods from a Φ45 cm / ∅17.7″ round ceiling plate, overall drop 250 cm / 98.4″.
9-Light Cluster
Nine capsule shades on staggered rods from a Φ50 cm / ∅19.7″ round ceiling plate, overall drop 300 cm / 118.1″.
11-Light Cluster
Eleven capsule shades on staggered rods from a Φ50 cm / ∅19.7″ round ceiling plate, overall drop 350 cm / 137.8″.
| Capsule Shade | Φ15 × H35 cm / ∅5.9″ × H13.8″ (same size on every configuration) |
| Single | One capsule shade; rod length not specified in the source |
| 3-Light Cluster | Φ30 cm plate × 150 cm drop / ∅11.8″ × 59.1″ |
| 5-Light Cluster | Φ35 cm plate × 200 cm drop / ∅13.8″ × 78.7″ |
| 7-Light Cluster | Φ45 cm plate × 250 cm drop / ∅17.7″ × 98.4″ |
| 9-Light Cluster | Φ50 cm plate × 300 cm drop / ∅19.7″ × 118.1″ |
| 11-Light Cluster | Φ50 cm plate × 350 cm drop / ∅19.7″ × 137.8″ |
🔍 Click any diagram to enlarge
The source did not separate ceiling plate size from cord/rod length beyond overall drop, and gave no rod length for the single configuration. Please confirm with us before ordering.
| Product Name | Lozenge Alabaster Rod Pendant |
| Product Type | Pendant Light, Capsule Alabaster Shade, Rigid Rod-Hung, Single or Multi-Rod Cluster (up to 11 lights), 1 hardware finish |
| Material | Dark Bronze Metal Hardware, Natural Alabaster Capsule Shade(s) |
| Finish | Dark Bronze (single finish; not offered in other metal colors) |
| Configuration Options | Single, 3-Light, 5-Light, 7-Light, 9-Light, or 11-Light Cluster (see Configuration Options above) |
| Capsule Shade Size | Φ15 × H35 cm / ∅5.9″ × H13.8″ (per capsule, same across all configurations) |
| Light Source | Integrated LED, Warm White 3000K (non-replaceable) |
| Voltage | AC 110–240V |
| Control | Standard wall switch; a dimmable version is available but must be specified at the time of order |
| Included Bulb | Not applicable — the LED is integrated into each capsule's dome cap, not a separate replaceable bulb |
| Mounting | Ceiling, Hardwired, Rigid Rod-Hung — rod lengths are pre-cut before shipping and cannot be adjusted on site |
| Environment | Indoor, dry locations only |
| Suitable Spaces | Dining table, kitchen island, staircase, entryway |
Rod/cord length for the Single configuration, individual finished weight, and certification weren't specified in the source. Please confirm these with us before ordering.
- Mount to a secure ceiling junction box; installation should follow local electrical requirements. Hardwired installation typically requires a licensed electrician.
- The light source is a non-replaceable integrated LED, warm white 3000K, built into each capsule's dome cap; there is no bulb to swap.
- Each rod is rigid and pre-cut to a fixed length before shipping — lengths are set at the time of order and cannot be shortened, extended, or adjusted on site.
- A dimmable version is available but must be requested at the time of order; the standard version operates on a regular wall switch.
- Dust the alabaster capsule shade(s) gently with a soft, dry cloth; avoid water, solvents, or abrasive cleaners, which can damage the natural stone.
- Wipe the metal hardware with a soft, dry cloth to preserve its finish; avoid abrasive cleaners.
- Disconnect power before cleaning or servicing the fixture.
- Intended for indoor, dry use.
What is the Lozenge Pendant made from?
A capsule (pill-shaped) natural alabaster shade, closed at the bottom, topped by a domed metal cap that joins a rigid rod through a small sphere, with a tiny finial hanging beneath — all in a dark bronze finish.
What configuration options are available?
A single pendant, or a multi-rod cluster of 3, 5, 7, 9, or 11 capsules on a round ceiling plate. Every capsule shade is the same Φ15 × H35 cm size — only the number of rods and the ceiling plate size change.
Why a rigid rod instead of a cord or chain?
A rigid rod holds its shape — it won't twist, swing, or drift out of alignment the way a cord can over time. The trade-off is that each rod is cut to length before it ships, so the staggered heights in a cluster are fixed at the time of order rather than adjustable on site.
What finishes are available?
Dark Bronze is the only finish offered, for the canopy or ceiling plate, rods, dome caps, and finials. The alabaster shades' natural coloring and veining will vary slightly from piece to piece.
Does it come with a bulb, and can it be dimmed?
No separate bulb — each capsule has a non-replaceable integrated LED (warm white 3000K). The standard version runs on a regular wall switch; a dimmable version is available but must be specified at the time of order.
How do I clean the alabaster shade?
Dust gently with a soft, dry cloth. Avoid water, solvents, or abrasive cleaners, which can damage the natural stone; wipe the metal hardware separately with a soft, dry cloth.
Can it be used outdoors or in humid rooms?
Lozenge is intended for indoor, dry locations only. Moisture can damage the natural alabaster shades over time.
Downloads
If it is a product quality problem or transportation damage, we will provide free return and exchange services, ensuring a hassle-free experience for our customers. Read the full Return & Refund Policy; if your order arrives damaged, see what to do when you receive a damaged item (report within 72 hours) and our shipping & tracking guide.
Design with confidence: Vakkerlight 3D Lighting Design Service
Take the guesswork out of lighting design. Whether for residential or commercial spaces, our 3D Lighting Design Service lets you visualize and customize fixtures in a realistic 3D environment before you buy.
- Personalized solutions: custom arrangements tailored to your exact space.
- True-to-life 3D: see how your fixtures will look before installation.
- Expert support: 1-on-1 guidance from our design specialists.
Resources & support: visit the 3D Lighting Design Service page to learn more. Need 3D Max files or detailed product parameters? Email info@vakkerlight.com and our team will be happy to assist you.
Product cut sheets (Google Drive) →
Welcome to Vakkerlight’s 3D Services. We pride ourselves on offering comprehensive design support to meet all your lighting needs. If you require 3D drawings, CAD plans or space design services, our experienced support team is here to help — email info@vakkerlight.com.
