Floral Wreath Chandelier
VKC-2661-01
- Standard Shipping to the United States
- Warranty Coverage Available
- 60-Day Returns on Eligible Items
- Customer Support by Email & Phone
- Personalized Customization Available
- Multiple Shipping Options Available
- Safe and Secure Payments
- Available in Region-Specific Electrical Options
- Em estoque
This floral wreath chandelier rings a glowing LED halo with dozens of hand-shaped ivory-white flowers, hand-dyed with subtle gray accents. Nine SKUs span three style families — flat Single Ring (4 sizes), sculpted C-Style with upward florals (3 sizes), and layered Double Ring (2 sizes). Diameters range from a compact ∅ 21.7″ pendant up to a ∅ 39.4″ statement.
Hand-shaped florals
Dozens of ivory white flowers in gypsum-resin composite, each shaped and hand-dyed individually.
Integrated LED halo
Built-in LED strip glows within the ring frame — no separate bulbs to install or replace.
Nine size and style options
Three families — flat Single Ring, sculpted C-Style, and layered Double Ring — from ∅ 21.7″ to ∅ 39.4″.
Each piece is hand-finished
The florals are individually shaped, hand-dyed, and arranged onto the ring by craftspeople, so every chandelier shows minor surface marks and slight variation in flower density, tone, and placement. These are characteristics of the craft, not defects. If you prefer a perfectly uniform machine finish, this piece may not be the right fit — email us with any questions before ordering.
Integrated LED, no bulb to install
An LED strip is built into the ring, so there is no separate bulb to buy or replace. Wattage varies by SKU: 35W (Small sizes), 40W (Single Ring Medium), 50W (Single Ring B / A and C-Style Medium), 85W (C-Style Large), 100W (Double Ring Small), and 120W (Double Ring Large). The LED is replaceable at authorized service rather than swapped at home.
Ivory white with hand-dyed accents
All six SKUs ship in ivory white with subtle hand-dyed gray accents on selected petals; the metal frame is finished to match. For project quantities or a longer suspension drop, email us before ordering.
Detailed dimension sheets for each unique layout. Click any diagram to view full size.
🔍 Click any thumbnail to open full size in a new tab
| Dimensions |
Single Ring family: · Small: ∅ 21.7″ x H 5.9″ (∅ 55 x H 15 cm) · Medium: ∅ 27.6″ x H 5.9″ (∅ 70 x H 15 cm) · B style ∅ 80: ∅ 31.5″ (∅ 80 cm) · A style ∅ 85: ∅ 33.5″ x H 9.8″ (∅ 85 x H 25 cm) C-Style family (upward florals): · Small: ∅ 21.7″ x H 11.8″ (∅ 55 x H 30 cm) · Medium: ∅ 31.5″ x H 13.8″ (∅ 80 x H 35 cm) · Large: ∅ 37.4″ x H 11.8″ (∅ 95 x H 30 cm) Double Ring family: · Small: ∅ 29.5″ / ∅ 21.7″ x H 11.8″ (∅ 75 / 55 x H 30 cm) · Large: ∅ 39.4″ / ∅ 27.6″ x H 11.8″ (∅ 100 / 70 x H 30 cm) |
| Canopy | ∅ 4.7″ x H 2.4″ (∅ 12 x 6 cm) |
| Suspension | Adjustable cable, 19.7″ (50 cm) default drop |
| Material | Gypsum-Resin Composite, Metal Alloy |
| Color | Ivory White with hand-dyed gray accents |
| Craft | Hand-shaped and hand-dyed flowers |
| Light source | Integrated LED strip · 35–120W by SKU · no replaceable bulb |
| Voltage | 120V (AC 110–240V global) |
| Mount | Hardwired ceiling junction box, indoor dry locations |
| Certification | Listed · North America · CE · SAA · SASO · KC |
- Hardwired to a standard ceiling junction box; we recommend a licensed electrician.
- Unpack the flowers gently — petals are hand-shaped and can chip if knocked against the box edge.
- Adjust the cable to set your drop height before final tightening.
- The C-Style Large and Double Ring models are heavier; confirm your junction box is rated for the load.
- Center over a dining table, hung roughly 30–36″ above the surface, or at least 7 ft above the floor in open areas.
- Indoor dry locations only — not rated for bathrooms, covered porches, or outdoor use.
- Dust the flowers with a soft brush; avoid wet cleaning, which can mark the composite surface or wash out the hand-dyed accents.
Will my chandelier look exactly like the photos?
The flowers are hand-shaped, hand-dyed, and arranged onto the ring individually, so every fixture is slightly different. You'll see small surface marks, subtle tonal variation, and an organic, irregular density of flowers. The photos are representative — the look is in the family but not identical piece to piece.
What's the difference between the SKUs?
Three style families share the same hand-shaped flowers and ivory finish. Single Ring (4 sizes, ∅ 55 / 70 / 80 / 85 cm) lays the florals flat around a thin halo, scaling from a compact halo to a dense centerpiece. C-Style (3 sizes, ∅ 55 / 80 / 95 cm) adds upward-facing florals on top of the ring for a sculpted profile. Double Ring (2 sizes, ∅ 75/55 and ∅ 100/70 cm) stacks two rings on the same suspension for a layered statement.
Are bulbs included? Is it dimmable?
The LED strip is built into the ring, so there is no separate bulb. The fixture itself is not dimmable. We don't recommend pairing it with an external wall dimmer, since the built-in driver isn't designed for that.
How high should the ceiling be?
We recommend at least an 8 ft ceiling for the smaller sizes, and 9 ft or taller for the C-Style Large (∅ 95 cm), Single Ring A (∅ 85 cm), and Double Ring models. Hang the chandelier 30–36″ above a dining table, and keep at least 7 ft of clearance from the floor to the lowest petal in open areas.
How do I clean it?
Dust the flowers with a soft brush or dry microfiber cloth. Avoid wet cleaning — the composite can mark or stain if water sits on the surface, and the hand-dyed accents can wash out. Email support if a flower needs replacement.
If it is a product quality problem or transportation damage, we will provide free return and exchange services, ensuring a hassle-free experience for our customers.
PRODUCT CUT SHEET
Design with Confidence: Vakkerlight 3D Lighting Service
Take the guesswork out of lighting design. Whether for residential or commercial spaces, Vakkerlight’s innovative 3D Lighting Design Service lets you visualize and customize fixtures in a realistic 3D environment before you buy.
- Personalized Solutions: Custom arrangements tailored to your exact space.
- True-to-Life 3D: See how your fixtures will look before installation.
- Expert Support: Get 1-on-1 guidance from our design specialists.
Resources & Support:
Visit our [3D Lighting Design Service page] to learn more. Need 3D Max files or detailed product parameters? Email us at info@vakkerlight.com and our team will be happy to assist you.
