Coconut Disc Chandelier
VKC6-2661-01
- Standard Shipping to the United States
- Warranty Coverage Available
- 60-Day Returns on Eligible Items
- Customer Support by Email & Phone
- Personalized Customization Available
- Multiple Shipping Options Available
- Safe and Secure Payments
- Available in Region-Specific Electrical Options
- Em estoque
This sculptural chandelier scatters dozens of hand-carved composite discs across a gold-finished metal frame, layered like petals or coconut shell pieces in a dome silhouette. It measures ∅ 32.3″ x H 21.7″ (∅ 82 x H 55 cm) and hangs from an adjustable chain, sized for a dining table, foyer, or living room. Pick matte white, matte black, or cream to match your room.
Hand-carved discs
Dozens of small composite discs layer across the frame, each shaped and sanded by hand.
Domed silhouette
The disc cluster opens downward in a wide dome ∅ 32.3″ across, casting warm light across the table.
Adjustable chain drop
Gold chain trims on site to set your drop height, with a 6.3″ canopy at the ceiling.
Each piece is hand-finished
The discs are carved, sanded, and finished by hand, so every chandelier shows minor surface marks and slight tonal variation across the discs. These are characteristics of the craft, not defects. If you prefer a perfectly uniform machine finish, this piece may not be the right fit — email us with any questions before ordering.
Nine E14 bulbs sold separately
Uses 9 standard E14 (small Edison screw) bulbs at 5W each. The fixture is designed for warm-white 3000K LED bulbs; matching color tone across all 9 sockets gives the most cohesive glow. Bulbs are not included.
Gold frame, three disc colors
Gold-finished metal frame across all three SKUs — only the disc color changes. For project quantities or a longer chain drop, email us before ordering.
Official dimension sheet (shared across all three colors). Click to enlarge.
Click to view full size ↗
| Dimensions | ∅ 32.3″ x H 21.7″ (∅ 82 x H 55 cm) |
| Canopy | ∅ 6.3″ (16 cm) |
| Material | Gypsum-Resin Composite, Metal |
| Color | Matte White, Matte Black, or Cream (select above) |
| Frame finish | Gold |
| Craft | Hand-carved and hand-sanded discs |
| Light source | 9 × E14 sockets · 5W each · bulbs sold separately |
| Color temperature | 3000K warm-white recommended |
| Voltage | 120V (AC 110–240V global) |
| Drop | Adjustable gold chain, trimmable on site |
| Mount | Hardwired ceiling junction box, indoor dry locations |
| Certification | Listed · North America · CE · SAA · SASO · KC |
- Hardwired to a standard ceiling junction box; we recommend a licensed electrician.
- Unpack carefully — the composite discs are individually attached and can chip if knocked against the box.
- Trim the chain to set your drop height before final installation.
- Install 9 E14 bulbs at 5W each, warm-white 3000K LED recommended. Do not exceed the rated wattage on the fixture label.
- Center over a dining table, hung roughly 30–36″ above the surface, or at least 7 ft above the floor in open areas.
- Indoor dry locations only — not rated for bathrooms, covered porches, or outdoor use.
- Dust the discs with a soft brush; avoid wet cleaning, which can mark the composite surface.
Will my chandelier look exactly like the photos?
The discs are hand-carved, hand-sanded, and finished individually, so every fixture is slightly different. You'll see small surface marks, subtle tonal variation, and an organic, irregular layout of discs across the frame. The photos are representative — the look is in the family but not identical piece to piece.
What bulbs does it use and are they included?
The chandelier uses 9 standard E14 (small Edison screw) bulbs at 5W each, and the bulbs are not included. We recommend warm-white 3000K LED bulbs around 400 lumens each, matched in color tone across all 9 sockets for an even glow.
Which color suits my room?
Matte white reads soft and gallery-like against neutral walls. Matte black gives a graphic, sculptural contrast in modern rooms. Cream sits warmest, pairing with oak, travertine, and earth tones. The gold frame stays the same across all three.
How high should the ceiling be?
We recommend at least an 8 ft ceiling, with the chandelier hung 30–36″ above a dining table. In open areas, keep 7 ft of clearance from the floor to the lowest disc. The chain is trimmable on site for shorter drops.
How do I clean it?
Dust the discs with a soft brush or a dry microfiber cloth. Avoid wet cleaning — the composite material can mark or stain if water sits on the surface. Email support if a disc needs replacement.
If it is a product quality problem or transportation damage, we will provide free return and exchange services, ensuring a hassle-free experience for our customers.
PRODUCT CUT SHEET
Design with Confidence: Vakkerlight 3D Lighting Service
Take the guesswork out of lighting design. Whether for residential or commercial spaces, Vakkerlight’s innovative 3D Lighting Design Service lets you visualize and customize fixtures in a realistic 3D environment before you buy.
- Personalized Solutions: Custom arrangements tailored to your exact space.
- True-to-Life 3D: See how your fixtures will look before installation.
- Expert Support: Get 1-on-1 guidance from our design specialists.
Resources & Support:
Visit our [3D Lighting Design Service page] to learn more. Need 3D Max files or detailed product parameters? Email us at info@vakkerlight.com and our team will be happy to assist you.
