Victorian Series Flush Mount
Victorian Series Flush Mount
Victorian Series Flush Mount
Victorian Series Flush Mount
Victorian Series Flush Mount
Victorian Series Flush Mount
Victorian Series Flush Mount
Victorian Series Flush Mount
Victorian Series Flush Mount
Victorian Series Flush Mount
Victorian Series Flush Mount
Victorian Series Flush Mount
Victorian Series Flush Mount
Victorian Series Flush Mount
Victorian Series Flush Mount
Victorian Series Flush Mount
Victorian Series Flush Mount

Victorian Series Flush Mount

VKC5-2673-02

السعر العادي $850.00 سعر البيع$359.00
/
شحن يتم احتساب المبلغ عند إتمام عملية الشراء.


  • الشحن القياسي إلى الولايات المتحدة
  • تغطية الضمان متاحة
  • إرجاع لمدة 60 يومًا على العناصر المؤهلة
  • دعم العملاء عبر البريد الإلكتروني & الهاتف
  • التخصيص الشخصي متاح
  • تتوفر خيارات شحن متعددة
  • مدفوعات آمنة ومأمونة
  • متوفر بخيارات كهربائية خاصة بالمنطقة

  • في المخزون، وعلى استعداد للشحن
  • تم طلبه متأخرًا، سيتم الشحن قريبًا

A hand-carved gypsum-resin flush mount from the Victorian Series — each unit individually sculpted, sanded, and finished before the Ø11 cm opal glass globe is fitted at the center. Two silhouettes: the Bouquet clusters layered petals and leaves in a loose, gathered arrangement around the globe; the Floral Crown is a single large bloom with deep radial ridges, more architectural in its symmetry. Three finishes — Ivory White, Matte Black, and Gilded Gold — are each applied by hand after carving. Because every piece is hand-finished, surface micro-texture varies slightly between units. G9 socket, 12W. All six variants are ceiling flush-mount with no pendant drop.


G9 socket — not E26 or E27

This fixture uses a G9 bi-pin socket — a small two-pin base common in European decorative lighting, distinct from the E26 (North America) or E27 (worldwide) screw base used in most pendant lamps. G9 LED capsule bulbs (12W) are available at specialty lighting retailers and online. Confirm bulb availability in your market before ordering. G9 bulbs are not interchangeable with E26 or E27.

Hardwired ceiling install — flush mount · no pendant drop

This fixture hardwires directly to the ceiling junction box. It is not plug-in. A licensed electrician is recommended. Turn off power at the breaker before installation. The Ø18 cm base plate mounts flush to the ceiling.

Hand-carved artisan piece — surface micro-texture is inherent

Each fixture is individually hand-carved and hand-sanded from gypsum-resin composite. Minor surface marks, texture variation, and small imperfections are an expected characteristic of hand-finished work and are not considered manufacturing defects. If surface perfection is a priority, review the product photography carefully before ordering.


Hand-carved gypsum-resin

Gypsum-resin composite is individually hand-carved and sanded — the surface detail in the petals, veins, and leaf edges comes from the carving process, not a mold stamp. Each unit carries the marks of the craftsperson who finished it.

Ø11 cm opal glass globe

A frosted opal glass ball globe (Ø11 cm) sits at the center of the carved surround — it diffuses the G9 light into a soft, even glow. The globe is a fixed element of the design and is not sold separately.

3 finishes · 2 silhouettes

Ivory White, Matte Black, and Gilded Gold — each applied by hand after carving. Two silhouettes: Bouquet (X-80202) and Floral Crown (X-80201). All six combinations are available.


Silhouette

Finish

Ivory White
Matte Black
Gilded Gold
Bouquet · Ivory White — X-80202

Body: Ø29 × H19 cm (11.4″ × 7.5″) · Base plate: Ø18 cm · Globe: Ø11 cm

Finish: hand-carved and sanded, ivory white — a matte warm off-white with subtle surface texture

Suits: bedroom · hallway · walk-in closet · powder room · compact entryway. Ivory reads softest under warm light.


Silhouette Model Body size Carving style
Bouquet X-80202 Ø29 × H19 cm
11.4″ × 7.5″
Multiple layered petals and leaves gathered loosely — organic, asymmetric floral cluster around the globe
Floral Crown X-80201 Ø30 × H20 cm
11.8″ × 7.9″
Single large bloom with deep radial ridges radiating from center — more architectural and symmetrical than the Bouquet

G9 bi-pin · 12W · not E26/E27 · confirm bulb availability in your market

G9 is a bi-pin socket — a small two-pin ceramic base used widely in European decorative ceiling fixtures. It is physically incompatible with E26 or E27 screw base bulbs. G9 LED capsule bulbs (12W) are available at specialty lighting retailers, home improvement stores, and online. In North America they are less common than E26 but widely stocked online. Confirm whether the bulb is included (see spec below) and whether G9 12W LEDs are available locally before ordering. For dimming, confirm the fixture's driver is compatible with Triac or trailing-edge LED dimmers, and use a G9 LED capsule rated for dimming.

Gypsum-resin composite · hand-carved · hand-sanded · hand-finished in three colorways

Gypsum-resin composite combines the fine surface detail of plaster casting with the structural durability of resin. Each fixture is hand-carved after initial casting — the carving step adds the fine edge definition in petal veins, leaf margins, and surface shadow lines that casting alone cannot achieve. It is then hand-sanded to a consistent surface before the finish is applied. Ivory White is a matte warm off-white with a subtle surface grain. Matte Black is a flat deep black — in low ambient light the carving reads as shadow relief. Gilded Gold uses a layered gilding technique that leaves warm variation across the carved surface rather than a uniform metallic coat.


🔍 Dimensions — tap to enlarge

Light source G9 bi-pin · 12W · 1 socket per fixture · CONFIRM if bulb is included
Globe shade Opal frosted glass · Ø11 cm · fixed (not removable)
Silhouettes Bouquet (X-80202): Ø29 × H19 cm (11.4″ × 7.5″)
Floral Crown (X-80201): Ø30 × H20 cm (11.8″ × 7.9″)
Base plate Ø18 cm — shared across both silhouettes
Finishes Ivory White · Matte Black · Gilded Gold (3 options per silhouette)
Material Gypsum-resin composite (hand-carved and hand-sanded) · opal glass globe
Craft Hand-carved  · hand-sanded · hand-finished colorway
Mounting Flush mount · hardwired · no pendant drop · Ø18 cm base plate
Input voltage CONFIRM BEFORE PUBLISHING — confirm 110–240V or 220–240V only
IP rating IP20 — indoor, dry locations only (confirm with supplier)
Dimmable CONFIRM BEFORE PUBLISHING — depends on G9 driver specification
Best for Bedroom · hallway · powder room · walk-in closet · entryway · reading corner · French country · grandmillennial · maximalist · transitional interiors
Default configuration

Select silhouette and finish at checkout. Custom colorways available — email us to discuss. Trade and bulk pricing available on request.


  • Turn off power at the breaker before installation. A licensed electrician is recommended for all hardwired ceiling connections. The Ø18 cm base plate mounts directly to the junction box.
  • Insert a G9 12W LED capsule bulb into the G9 socket. G9 is a bi-pin socket — the two pins slide into the socket and twist to lock. Do not attempt to use an E26 or E27 bulb — the sockets are physically incompatible.
  • If dimming is required: confirm the internal driver supports LED dimming (Triac or trailing-edge) and use a G9 LED capsule rated for dimming. A non-dimmable driver on a dimmer circuit may flicker or buzz.
  • Gypsum-resin body: dust with a soft dry brush or a low-suction vacuum brush attachment. Work carefully around the carved edges, which can accumulate dust in the shadow lines. Do not wet-clean — water softens gypsum-resin composite and can damage the surface finish and carved detail. Do not use abrasive cleaners, solvents, or polish.
  • Opal glass globe: wipe with a soft dry or slightly damp cloth when the fixture is off and fully cooled. Dry immediately — do not leave moisture on the glass.
  • Gilded Gold finish: handle the body with care — the gilded surface is sensitive to oils from skin contact. Avoid gripping the carved face directly; hold from the base plate during installation. Light cleaning with a dry, soft cloth only.
  • The fixture is a hand-finished artisan piece — surface micro-texture and minor variation in the carved surface between units is inherent to the production process. This is not a defect.


What is a G9 socket, and can I find bulbs easily?

G9 is a bi-pin socket — two ceramic pins slot directly into the fitting, used widely in European decorative ceiling lights, chandeliers, and wall sconces. It is not a screw base and is not interchangeable with E26 or E27 bulbs. G9 LED capsule bulbs (12W, warm white) are available at specialty lighting retailers, home improvement stores, and widely online in North America, Europe, and Australia. Confirm local availability before ordering if you are outside Europe.

Which silhouette should I choose — Bouquet or Floral Crown?

The Bouquet (X-80202, Ø29 cm) clusters petals and leaves in a loose, gathered arrangement that reads as an organic floral still-life on the ceiling. The carving is asymmetric — different details appear on different sides. The Floral Crown (X-80201, Ø30 cm) is a single large bloom with deep radial ridges extending from the center outward — more architectural and symmetric in its silhouette. From below, the Crown reads as a cleaner, more graphic form; the Bouquet reads as more naturalistic and layered. Both are 1 cm different in diameter and 1 cm in height — functionally the same size for room planning purposes.

Which finish should I choose?

Ivory White is the most versatile — it reads almost as architectural detail on a white or pale ceiling, close to a ceiling medallion with a lamp, rather than a colored fixture. It suits French country, grandmillennial, and soft-neutral interiors. Matte Black is the most dramatic — the carved shadow lines disappear into the flat dark surface in ambient light, and the form reads as a dark sculptural relief. It suits more contemporary, eclectic, or maximalist rooms. Gilded Gold is the most decorative — the layered gilding picks up warm light variation across the carving and suits formal, Art Nouveau-adjacent, or Parisian-influenced interiors. All three finishes are applied by hand after carving, so tonal variation within the same colorway between units is possible.

My fixture has small marks on the surface — is this a defect?

No. The supplier notes explicitly: "产品为手工艺品,表面会有微瑕痕迹" — this translates as "this product is a handmade piece; the surface will have minor marks and traces." Surface micro-texture, small tool marks in the carved areas, and slight variation in the finish between units are all inherent characteristics of hand-carved, hand-finished production. They are not considered manufacturing defects. If your piece has a structural issue — a crack in the body, a globe that is chipped or broken — that is different and should be reported to us immediately.

Is it dimmable?

Dimming depends on the internal G9 LED driver specification and the G9 bulb used. Confirm the driver dimmability with the spec sheet before connecting to a wall dimmer switch. If the driver supports dimming, use a G9 LED capsule bulb rated for dimming and a compatible Triac or trailing-edge dimmer. Connecting a non-dimmable driver to a dimmer circuit may cause flickering, buzzing, or driver damage over time.

Can I get a custom color?

Yes. The supplier offers custom colorways — noted as "颜色可定制" on the product specification. Contact us at hello@vakkerlight.com with your project details and preferred color reference (RAL or paint chip if available) to discuss custom finish options, lead time, and minimum order requirements.

What interior styles does this suit?

The Victorian-era floral carving and globe diffuser combination works naturally in French country, grandmillennial, cottagecore, and Parisian-adjacent interiors. The Ivory White finish suits soft-neutral rooms with vintage furniture, floral wallpaper, or linen textiles. The Matte Black finish crosses into more contemporary or maximalist spaces — it reads as sculptural rather than period. The Gilded Gold suits formal dining rooms, boutique hotel-inspired bedrooms, and Art Nouveau or Baroque-influenced interiors. All three finishes work in transitional rooms that mix antique and modern elements at a smaller scale.

 

في حالة وجود مشكلة في جودة المنتج أو تلف أثناء النقل، سنقدم خدمات الإرجاع والاستبدال المجانية، مما يضمن تجربة خالية من المتاعب لعملائنا.

ورقة بيانات المنتج

صمم بثقة: خدمة إضاءة ثلاثية الأبعاد من فاكرلايت

تخلص من التخمين في تصميم الإضاءة. سواءً للمساحات السكنية أو التجارية، تتيح لك خدمة تصميم الإضاءة ثلاثية الأبعاد المبتكرة من Vakkerlight تصور وتخصيص وحدات الإضاءة في بيئة ثلاثية الأبعاد واقعية قبل الشراء.

  • حلول مُخصصة: ترتيبات مخصصة مصممة خصيصًا لمساحتك.
  • تقنية ثلاثية الأبعاد واقعية: تعرّف على شكل تجهيزاتك قبل تركيبها.
  • الدعم الفني المتخصص: احصل على إرشادات فردية من متخصصي التصميم لدينا.

موارد & يدعم:
تفضل بزيارة صفحة [خدمة تصميم الإضاءة ثلاثية الأبعاد] لمعرفة المزيد. هل تحتاج إلى مساعدة؟ ملفات 3D Max هل تحتاج إلى معلومات تفصيلية عن المنتج؟ راسلنا عبر البريد الإلكتروني على: info@vakkerlight.com وسيسعد فريقنا بمساعدتك.

مرحبًا بك في صفحة خدمات Vakkerlight ثلاثية الأبعاد! نحن نفخر بتقديم دعم التصميم الشامل لتلبية جميع احتياجات الإضاءة الخاصة بك. إذا كنت بحاجة إلى رسومات ثلاثية الأبعاد، أو خطط CAD، أو خدمات تصميم المساحات، فإن فريق الدعم ذو الخبرة لدينا موجود لمساعدتك.

This site is protected by hCaptcha and the hCaptcha Privacy Policy and Terms of Service apply.

معلومات العملاء

معلومات الامتثال

تختلف تفاصيل الشهادات والتوافق حسب المنتج، وهي متاحة على صفحة المنتج أو عند الطلب.

سياسة العائدات

يمكن إرجاع المنتجات المؤهلة خلال 60 يومًا وفقًا لسياسة الإرجاع الخاصة بنا. & سياسة الاسترداد.

تأمين السفن

قد تكون الطلبات المؤهلة مؤهلة للحصول على استبدال أو استرداد ثمن الطرود المفقودة أو التالفة.

تقنية LED الفعالة

تتميز العديد من المنتجات بتقنية LED الموفرة للطاقة لتحقيق كفاءة إضاءة يومية.


تم عرضها مؤخرًا

قد ترغب أيضا

ارفع أي غرفة على الفور.

الخصم اليومي

اكتشف الإضاءة التي تحول كل زاوية إلى ملاذ مريح.
تسوق الكل