Understanding IP Ratings: A Complete Guide to Ensuring the Right Lighting for Every Environment

When it comes to choosing the right lighting for your home or business, one crucial factor often overlooked is the IP rating of the lighting fixture. While design, aesthetics, and energy efficiency usually take center stage, the IP rating holds the key to ensuring your lighting is suitable for the specific conditions it will face. Whether you're installing lights in a damp bathroom, an exposed outdoor area, or a dusty industrial setting, IP ratings will help you make an informed decision.

In this comprehensive guide, we’ll break down what IP ratings mean, why they are essential, and how they can save you time, money, and frustration. We’ll also explore real-life scenarios where choosing the correct IP rating is critical and make product recommendations that align with your needs.


What is an IP Rating?

The term IP stands for Ingress Protection, and an IP rating is a measure of how well a fixture is protected against two specific types of intrusion—solid objects (like dust) and liquid (water). The IP rating is represented by two numbers, each of which has a specific meaning.

  • The first digit (ranging from 0 to 6) indicates the level of protection against solid objects, such as dust, sand, or debris.
  • The second digit (ranging from 0 to 9) indicates the level of protection against liquids, such as water or moisture.

The Importance of IP Ratings

While it might be tempting to pick lighting based solely on its design or brightness, the IP rating is an essential safety feature that ensures the longevity and functionality of your lighting fixtures. Understanding these ratings can save you from a whole host of issues—ranging from the inconvenience of constantly replacing water-damaged lights to the more serious risk of electrical hazards.

Without the correct IP rating, you might install lights in areas where they are prone to damage, significantly reducing their lifespan. For example, installing a light with a low IP rating in your outdoor garden might leave it vulnerable to rain, leading to malfunction or complete failure.

On the flip side, selecting lighting with a high IP rating for indoor use might result in an unnecessary increase in costs. Thus, understanding the nuances of IP ratings helps you optimize both functionality and cost.


Breaking Down the IP Rating: What Do the Numbers Mean?

Let’s delve deeper into what each number in an IP rating signifies and how you can use that information to make the right lighting choices for various environments.

First Digit: Protection Against Solids (0-6)

  • IP0X: No protection against solid objects. The light fixture is not protected from contact or infiltration by dust or other solid particles.
  • IP1X: Protection against large objects greater than 50mm in size, such as hands. This is minimal protection and generally unsuitable for most real-world applications.
  • IP2X: Protection against objects larger than 12.5mm, such as fingers. Still considered low protection but usable in some indoor settings.
  • IP3X: Protection against objects larger than 2.5mm, such as tools or thick wires.
  • IP4X: Protection against objects larger than 1mm, including most small wires and tools.
  • IP5X: Partial protection against dust. The fixture is protected enough to prevent dust from affecting its performance.
  • IP6X: Complete protection against dust. The fixture is entirely dust-tight, which is essential for dusty environments like industrial workshops or outdoor installations in sandy areas.

Second Digit: Protection Against Liquids (0-9)

  • IPX0: No protection against water or liquids. This rating is unsuitable for areas with any potential moisture.
  • IPX1: Protection against vertically falling drops of water, such as condensation. Suitable for indoor use, away from direct contact with water.
  • IPX2: Protection against water droplets when tilted up to 15 degrees. Useful for slightly damp environments.
  • IPX3: Protection against spraying water at up to 60-degree angles. This rating is applicable for certain outdoor areas or bathrooms.
  • IPX4: Protection against splashing water from any direction, ideal for areas like kitchens or bathrooms where splashes are common.
  • IPX5: Protection against low-pressure water jets from any direction. A good choice for outdoor lighting exposed to light rain or washing.
  • IPX6: Protection against powerful water jets, suitable for areas exposed to heavy rain or high-pressure cleaning.
  • IPX7: Protection against temporary immersion in water. This is suitable for areas that may experience flooding or deep puddles.
  • IPX8: Protection against continuous immersion in water. Typically used for underwater lighting fixtures in pools or fountains.
  • IPX9: Protection against high-pressure, high-temperature water jets. This is the highest level of liquid protection and is generally used in industrial settings.

What do the different IP ratings mean?

The tables below explain what the different IP ratings are, divided into the degree of dust-tightness (first number) and the degree of waterproofness (second number). With this, we hope to get you started in making the right product decision.

IP rating chart (1st digit)

Level Protected against / is: Effective against, for example:
0 Not protected -
1 Objects larger than 50mm Accidental touching with hands.
2 Objects larger than 12,5mm Touching the fixture with fingers.
3 Objects larger than 2,5mm Contact with wires, cables and tools.
4 Objects larger than 1mm Tapping with wires, cables and tools.
5 Protected against dust Contact with live parts, such as wiring, and at the same time harmful accumulation of dust. Dust may enter, but does not affect operation.
6 Completely dustproof Ingress of dust and contact with live parts, such as wiring.

IP rating chart (2nd digit)

Level Protected against hydropower The fixture is:
0 Not protected -
1 Dripping water Protected against water droplets falling vertically.
2 Dripping water Resistant to water drops falling at a maximum angle of 15°.
3 Sprinkling water Protected against water falling at a maximum angle of 60°.
4 Splashing water Resistant to water splashes from any direction.
5 Water jets Protected against low-pressure water jets from any direction.
6 Powerful water jets Resistant to strong water jets from any direction.
7 Immersion up to 1m deep Protected against temporary immersion in water; maximum 30 minutes.
8 Immersion deeper than 1m Resistant to prolonged water immersion under pressure.

Which dust- and water resistance do you need?

This depends on the environment in which you want to place the fixture. For example, are you dealing with an indoor or outdoor environment? And does the fixture have direct contact with water or does it have to cope with moisture via evaporation? Here are two examples.

IP rating for bathroom lights

In bathrooms, IP44 is a perfect degree of protection. Lighting is not in direct contact with water, but it may encounter splashes or vapour that spreads when taking a shower or bath. You can always choose to purchase an LED fixture with a higher IP rating. A popular waterproof fixture for bathrooms is the recessed LED spotlight.

IP rating for outdoor lighting

Which IP value is best suited outdoors has to do with placement. Fixtures installed under a canopy or in sheltered open areas can function perfectly well with an IP44 housing. If the lighting is placed in an exposed outdoor area, it is better to choose an IP65, IP66 or IP67 fixture.

Why IP Ratings Matter: The Consequences of Choosing the Wrong Rating

The importance of IP ratings becomes clear when you consider the consequences of choosing the wrong one for your environment. The wrong IP rating can lead to premature failure, higher maintenance costs, and even dangerous electrical hazards.

1. Water Damage in Bathrooms and Kitchens

Consider your bathroom. It’s a space with high humidity levels and frequent splashes of water, particularly around the sink, shower, and bathtub. Installing a light fixture with a low IP rating in these zones exposes it to moisture, which can cause electrical short circuits or lead to corrosion over time.

Solution: Look for fixtures with an IP rating of at least IP44 for bathrooms. This rating ensures protection against splashes from all angles, making it perfect for zones near water sources. For areas directly exposed to water, like showerheads, opt for IP65 or higher.

2. Outdoor Lighting and Weather Exposure

Outdoor lighting is another area where IP ratings play a critical role. Fixtures that aren’t designed to withstand weather conditions such as rain, snow, or dust can quickly deteriorate, leaving you with malfunctioning lights and the hassle of frequent replacements. Additionally, poorly protected outdoor lights may become a safety hazard during storms.

Solution: For outdoor use, an IP65 rating is typically recommended. This level of protection guards against both dust and water jets, making it ideal for porch lights, garden fixtures, and pathway lighting.

3. Industrial and Commercial Environments

In industrial settings, where dust, dirt, and water are ever-present, the wrong IP rating can lead to frequent malfunctions and dangerous conditions. For example, a light fixture in a manufacturing facility that produces a lot of dust should have an IP rating that ensures complete protection against solid particles.

Solution: Look for lights with a rating of IP66 or higher in industrial environments. This will provide full protection against both dust and water, ensuring long-term durability and safety.


Common Areas and Their Recommended IP Ratings

To make things easier, here’s a guide to common household and commercial areas and their recommended IP ratings:

  • Living Rooms and Bedrooms: IP20 or IP21 – Since these areas are typically free from moisture and dust, low IP ratings are sufficient.
  • Bathrooms (General Areas): IP44 – Provides protection against moisture and splashes, suitable for general bathroom use.
  • Bathrooms (Shower Zones): IP65 – Higher protection for fixtures installed near water sources like showers or bathtubs.
  • Kitchens: IP44 – Ideal for areas exposed to splashes, such as around the sink.
  • Gardens and Patios: IP65 – Protection against dust and rain, perfect for outdoor use.
  • Industrial Settings: IP66 or higher – Complete protection against dust and powerful water jets, necessary for durability in challenging environments.

How to Choose the Right Lighting with the Appropriate IP Rating

Now that you understand what IP ratings are and why they matter, how do you go about choosing the right lighting for your home or business? Here are some factors to consider when selecting lighting fixtures with the appropriate IP rating:

1. Assess the Environment

The first step in choosing the right IP-rated light is to assess the environment in which it will be used. Is the area exposed to moisture, dust, or harsh weather conditions? Are the lights likely to come into contact with water? Answering these questions will help you narrow down your options.

For example, if you’re installing lights in a bathroom, an IP44 rating will suffice for most areas, but for lights placed near the shower, an IP65 rating is more appropriate.

2. Consider the Long-Term Costs

While lights with higher IP ratings tend to be more expensive upfront, they can save you money in the long run by reducing the need for frequent replacements and maintenance. Cheaper lights with lower IP ratings might seem like a good deal, but if they aren’t suited to your environment, you’ll likely end up spending more on replacements and repairs.

3. Focus on Aesthetics and Functionality

While IP ratings are essential, they shouldn’t compromise the aesthetic or functional aspects of your lighting. For instance, just because a light fixture needs to be water-resistant doesn’t mean it has to be unattractive. Many high-quality fixtures are designed with both functionality and style in mind, ensuring that you don’t have to sacrifice one for the other.

Common Myths About IP Ratings

Even though IP ratings are relatively straightforward, there are a few misconceptions that can lead to confusion when selecting lighting. Let’s dispel some of the most common myths about IP ratings.

Myth 1: Higher IP Ratings Are Always Better

While it’s true that higher IP ratings offer more protection, that doesn’t mean they’re always the best choice for every situation. For example, installing an IP68-rated fixture in your living room would be overkill. It would be expensive and unnecessary since the space isn’t exposed to water or dust. Always match the IP rating to the environment where the light will be used rather than assuming higher ratings are universally superior.

Myth 2: IP Ratings Protect Against All Hazards

IP ratings only indicate protection against dust and water. They do not guarantee protection from all potential hazards, such as electrical surges, extreme temperatures, or physical damage. If your lighting needs to be protected from impacts (for example, in a garage or workshop), look for lights with additional durability features like IK ratings, which measure impact resistance.

Myth 3: All Outdoor Lights Need an IP67 Rating or Higher

While it might seem like outdoor lights should have the highest possible protection, most outdoor environments don’t require IP67 or higher. For example, an IP65 rating will offer sufficient protection against rain, snow, and dust for most residential outdoor lighting needs. IP67 or higher ratings are typically needed in more extreme conditions, such as submerged lights in ponds or fountains.

Myth 4: Indoor Lights Don’t Need IP Ratings

Indoor lights, particularly those used in bathrooms, kitchens, or industrial settings, may still need an IP rating. Areas exposed to moisture, steam, or dust can benefit from having lights with IP44 ratings or higher to prevent damage and extend the life of the fixture.


How to Maintain IP-Rated Lighting

Once you’ve selected the right lighting with an appropriate IP rating, it’s important to maintain those fixtures to ensure they continue performing optimally. Just because a light is rated to resist water and dust doesn’t mean it’s completely maintenance-free. Here’s how you can take care of your IP-rated lights.

1. Regular Cleaning

Even lights with high IP ratings can accumulate dust and grime over time, which can affect their performance. Regularly wipe down your fixtures with a soft cloth to remove dust and dirt. For outdoor lights, make sure to clean off any mud or debris, especially after rain or windy weather.

2. Inspect for Damage

IP-rated fixtures are designed to withstand certain conditions, but they aren’t immune to wear and tear. Periodically check your lights for cracks, loose seals, or other signs of damage. Damaged seals can reduce the fixture’s ability to keep out water and dust, leading to premature failure.

3. Replace Worn Gaskets and Seals

If your IP-rated lights have gaskets or seals (common in outdoor or industrial lighting), make sure to replace them if they become worn or brittle. These components are key to maintaining the fixture’s resistance to water and dust, and neglecting them can lead to leaks or damage.

4. Use the Right Bulbs

It’s essential to use the right type of bulb for your IP-rated fixture. For example, using a bulb that generates too much heat can compromise the fixture’s protective elements, particularly in enclosed outdoor or bathroom lights. LED bulbs are a great option for many IP-rated fixtures because they emit less heat and are energy-efficient.

5. Monitor for Moisture Build-Up

Even though your light fixtures may be rated for exposure to moisture, condensation can still accumulate inside the casing over time. If you notice condensation forming inside an IP-rated fixture, it may be a sign that the seals are deteriorating. Address the issue promptly to avoid more serious damage.


Lighting Recommendations for Different Environments

Now that you understand the importance of IP ratings and how to maintain IP-rated lights, it’s time to explore some specific lighting recommendations for different environments. Below, we’ll match common residential and commercial settings with the appropriate IP ratings and offer product suggestions.

1. Bathroom Lighting

The bathroom is one of the most challenging environments for lighting due to the high levels of moisture and steam. Proper lighting is essential for both functionality and aesthetics, and it’s crucial to choose fixtures that can withstand the damp environment.

  • Recommended IP Rating: IP44 or higher
  • Zones to Consider:
    • Zone 1 (Inside the shower or bathtub): Requires at least IP65-rated fixtures.
    • Zone 2 (Areas within 0.6 meters of the shower or bath): Should have IP44-rated fixtures to handle water splashes.
    • Zone 3 (Areas further from direct water sources): IP20-rated fixtures are sufficient here.

Product Recommendation:

  • Vakkerlight Bathroom Wall Lights – These IP44-rated lights are designed specifically for bathroom environments. They provide excellent task lighting while being protected from moisture, making them ideal for placement near vanities or sinks.

2. Outdoor Lighting

Outdoor lighting must be able to withstand a variety of environmental conditions, including rain, snow, dust, and wind. Whether you’re lighting a garden, pathway, or porch, it’s essential to choose fixtures that are tough enough to handle the elements.

  • Recommended IP Rating: IP65 for general outdoor use
  • Specific Areas:
    • Pathway Lights: IP65-rated lights will offer adequate protection against rain and dust.
    • Porch Lights: For covered porches, IP44-rated lights may be sufficient, but if the area is exposed to wind-driven rain, opt for IP65.
    • Garden Lights: For garden areas exposed to sprinklers or hoses, IP67 lights provide extra protection against temporary submersion.

Product Recommendation:

  • Vakkerlight Garden Pathway Lights – These stylish outdoor lights are IP65-rated, ensuring they are protected from dust and water jets, making them ideal for illuminating your outdoor spaces year-round.

3. Kitchen Lighting

Kitchens can be tricky to light due to the presence of steam, grease, and moisture, especially near cooking surfaces. Choosing the right IP rating helps ensure that your lights remain functional even in these challenging conditions.

  • Recommended IP Rating: IP44 for areas exposed to moisture or grease
  • Specific Areas:
    • Under-Cabinet Lighting: Look for IP44-rated lights to protect against splashes and grease.
    • Overhead Lighting: IP20 fixtures can be used in areas far from water and grease, but IP44-rated lights are ideal for fixtures directly above stoves or sinks.

Product Recommendation:

  • Vakkerlight Kitchen LED Strip Lights – These IP44-rated LED strip lights are perfect for under-cabinet installations, providing excellent task lighting while being protected from kitchen moisture and grease.

4. Industrial and Commercial Settings

In industrial settings such as warehouses, factories, or workshops, lighting fixtures are exposed to much harsher conditions. Dust, debris, water, and even chemicals can be present, making high IP-rated lights essential for safety and longevity.

  • Recommended IP Rating: IP66 or higher for industrial environments
  • Specific Areas:
    • Warehouse Lighting: IP65-rated lights are usually sufficient for general warehouse lighting.
    • Workshops and Factories: IP66 or higher lights are recommended for environments with high levels of dust or water.
    • Car Washes or Food Processing Facilities: In areas with water jets or frequent cleaning, IP67 or higher is essential.

Product Recommendation:

  • Vakkerlight Industrial High-Bay LED Lights – Designed for harsh industrial environments, these IP66-rated lights provide bright, durable lighting that can withstand dust and water exposure.

How IP Ratings Affect Lighting Choices for Consumers

For many consumers, IP ratings might seem like a technical aspect that’s easy to ignore. However, understanding the implications of IP ratings is essential for making informed choices. When consumers buy lighting without considering IP ratings, they risk investing in fixtures that won’t last or function effectively in certain environments.

Here’s why consumers should care about IP ratings:

1. Preventing Damage

Whether it's water damage in the bathroom or dust accumulation in an outdoor fixture, not having the right IP rating can result in broken lights and increased maintenance costs. IP-rated lights are built to withstand the conditions they will face, ensuring that consumers don’t have to constantly replace fixtures.

2. Safety Concerns

Electrical fixtures exposed to water or dust can become hazardous. For example, placing a low IP-rated light in an outdoor area prone to rain could lead to electrical shorts, posing a fire hazard. IP ratings are designed to prevent these risks by ensuring that the fixture remains sealed and protected from external elements.

3. Long-Term Savings

While IP-rated lights might cost more upfront, they can save consumers money in the long run. A light with the correct IP rating for its environment is less likely to break or malfunction, reducing the need for replacements and repairs.

4. Peace of Mind

Choosing the right IP-rated lights gives consumers peace of mind, knowing that their fixtures are designed to handle the conditions they will be exposed to. Whether it’s an outdoor garden party or a relaxing bath, consumers can enjoy their lighting without worrying about damage or failure.

A high IP rating does not mean you can use the fixture outdoors!

Have you bought lighting with a (splash)waterproof IP value? Perfect for indoors! To be labelled as an outdoor fixture, you need to meet more requirements, which actually refers to the fact that the material of the housing and connection should be suitable for the type of environment. For instance, corrosion-resistant fixtures in coastal areas. Or fixtures with waterproof transformers, LED drivers or other accessories. You can view all LED outdoor lighting here >>


Deixe um comentário

Este site está protegido pela Política de privacidade da reCAPTCHA e da Google e aplicam-se os Termos de serviço das mesmas.