Tulip Gold Chandelier
VKC5-26529-01
- In stock, ready to ship
This brass tulip chandelier curves slim brass arms outward and lifts a tulip-shaped glass shade at each tip. Pick 3, 5, 6, or 8 lights to fit a 4-seat table up through a large dining room, and choose copper, milk-white, or pink glass. The body stays brass; only the glass color changes.
5-Light
6-Light
8-Light
Curved brass arms
Slim brass arms swoop outward from a central stem, available in 3, 5, 6, or 8 lights.
Tulip glass shades
Upward-facing tulip cups in copper, milk-white, or pink glass cradle each bulb.
Warm brass body
Plated iron stem and arms in a soft brass finish that pairs with wood, marble, and cream walls.
E27 LED bulbs sold separately
Each socket takes one standard E27 (Edison screw) LED bulb, warm-white recommended. Quantity matches your chosen size: 3, 5, 6, or 8 bulbs. Bulbs are not included so you can match the color temperature and lumen output you prefer.
Brass body, three glass colors, adjustable drop
Body and arms are brass-finished plated iron across every size. Only the glass color changes. On the 3-, 5- and 8-Light the rigid rod from the canopy is adjustable on site to set your drop height. The 6-Light ships as standard with a 10 cm + 20 cm two-section connecting rod instead of an adjustable rigid rod, so its drop is set by the rods supplied. For project quantities, email us before ordering.
Official dimension sheet for each size. Click any diagram to enlarge.
Click any diagram to view full size ↗
| Dimensions | 3-Light: ∅ 20.9″ x H 15.4″ (53 x 39 cm) 5-Light: ∅ 26.8″ x H 22″ (68 x 56 cm) 6-Light: ∅ 26.8″ x H 22″ (68 x 56 cm) 8-Light: ∅ 35″ x H 29.9″ (89 x 76 cm) |
| Material | Iron, Handcrafted Glass |
| Body color | Brass |
| Glass color | Copper, Milk White, or Pink (select above) |
| Light source | E27 LED sockets · bulbs sold separately |
| Socket count | 3 · 5 · 6 · or 8 (by size) |
| Drop | 3-, 5- and 8-Light: adjustable rigid rod from canopy 6-Light: 10 cm + 20 cm two-section connecting rod (standard, not adjustable) |
| Voltage | 120V (AC 110–240V global) |
| Coverage | 160–194 sq ft (15–18 m²) |
| Mount | Hardwired ceiling junction box, indoor dry locations |
| Certification | Listed · North America · CE · SAA · SASO · KC |
- Hardwired to a standard ceiling junction box; we recommend a licensed electrician.
- On the 3-, 5- and 8-Light, adjust the rigid rod from the canopy to set the drop height before final tightening.
- The 6-Light ships as standard with a 10 cm + 20 cm two-section connecting rod, not an adjustable rigid rod; its drop is set by the rods supplied.
- The 8-light version is heavier; confirm your junction box is rated for the load before mounting.
- Install one E27 LED bulb per socket, warm-white recommended.
- Center over a dining table, hung roughly 30–36″ above the surface, or at least 7 ft above the floor in open areas.
- Indoor dry locations only — not rated for bathrooms, covered porches, or outdoor use.
- Wipe the brass with a dry, soft microfiber cloth; wipe glass with a glass cleaner on a separate cloth.
Which size fits my dining table or room?
The manufacturer recommends 160–194 sq ft (15–18 m²) rooms for the family. Within that, 3-Light (∅ 20.9″) suits a 4-seat table or smaller dining nook, 5-Light or 6-Light (∅ 26.8″) suits a 6–8 seat dining table, and 8-Light (∅ 35″) suits an 8–10 seat table or a large dining room. Keep the chandelier roughly half to two-thirds the width of the table.
How do the three glass colors read in a room?
Copper glass glows warm amber and pairs with wood and earth tones. Milk-white reads softest and most neutral. Pink adds a quiet blush, working well with cream walls and natural oak. The brass body stays the same in all three.
What bulbs does this chandelier need and are they included?
Each socket takes one standard E27 (Edison screw) LED bulb. The bulbs are not included. We recommend warm-white LED bulbs of 400–600 lumens each, matched in tone across all sockets.
Is it dimmable?
The fixture itself has no built-in dimmer. Pair it with dimmable E27 LED bulbs and a compatible wall dimmer if you want dimming; confirm the dimmer is rated for LED loads.
What is the warranty?
The chandelier carries a 2-year warranty against manufacturing defects. Email support with your order number if anything arrives damaged or fails in normal use.
Sizing & questions
Every piece is made to order in our own atelier — here is what most clients ask before choosing theirs.
What ceiling height do I need?+
Hang the chandelier roughly 30–36″ above the dining table surface, or at least 7 ft above the floor in open areas. On the 3-, 5- and 8-Light the rigid rod from the canopy is adjustable on-site to set your final drop height. The 6-Light comes as standard with a 10 cm + 20 cm two-section connecting rod, so its drop is fixed by the rods supplied.
How do I clean it?+
Wipe the brass with a dry, soft microfiber cloth. Use a glass cleaner on a separate cloth for the tulip shades. Avoid moisture buildup on the brass to maintain its finish.
Can this be customized?+
Yes—Vakkerlight hand-builds each chandelier in its own atelier. Contact us before ordering for custom sizing, additional light counts, or project quantities to discuss your exact requirements.
Downloads
If it is a product quality problem or transportation damage, we will provide free return and exchange services, ensuring a hassle-free experience for our customers. Read the full Return & Refund Policy; if your order arrives damaged, see what to do when you receive a damaged item (report within 72 hours) and our shipping & tracking guide.
Design with confidence: Vakkerlight 3D Lighting Design Service
Take the guesswork out of lighting design. Whether for residential or commercial spaces, our 3D Lighting Design Service lets you visualize and customize fixtures in a realistic 3D environment before you buy.
- Personalized solutions: custom arrangements tailored to your exact space.
- True-to-life 3D: see how your fixtures will look before installation.
- Expert support: 1-on-1 guidance from our design specialists.
Resources & support: visit the 3D Lighting Design Service page to learn more. Need 3D Max files or detailed product parameters? Email info@vakkerlight.com and our team will be happy to assist you.
Product cut sheets (Google Drive) →
Welcome to Vakkerlight’s 3D Services. We pride ourselves on offering comprehensive design support to meet all your lighting needs. If you require 3D drawings, CAD plans or space design services, our experienced support team is here to help — email info@vakkerlight.com.
