Raggiera Alabaster Globe Wall Sconce
VKW4-2664-01
- In stock, ready to ship
Complete the collection
A seven-light brass wall sconce with natural alabaster globe shades branching off a slim central tube. Each translucent stone globe glows soft and warm from a 3W 3000K LED, and the veining is unique to every piece. It spans 12″ wide, stands 16″ tall, and projects 7.5″ from the wall — a sculptural mid-century light for an entryway, bedroom, or living room.
Seven alabaster globes
Translucent natural stone, each with unique veining, glowing warm.
Brass branch frame
Slim arms off a central tube — sculptural from the side as well as head-on.
Warm 3000K LED
Seven 3W sources (21W total) for soft, ambient wall light.
Default configuration
Pictured: the natural-brass finish with seven white alabaster globes and built-in 3W / 3000K warm-white LEDs. Standard ready-to-ship version.
Finish options
Also available in black and brushed nickel. Email us your finish and room to confirm before you order.
| Finish | Size (W × proj. × H) | Light source | Best for |
|---|---|---|---|
| Brass (pictured) | 12″ × 7.5″ × 16″ (300 × 190 × 400 mm) | 7 × 3W LED, 3000K | Entryway, living room |
| Black | 12″ × 7.5″ × 16″ (300 × 190 × 400 mm) | 7 × 3W LED, 3000K | Bedroom, hallway |
| Brushed nickel | 12″ × 7.5″ × 16″ (300 × 190 × 400 mm) | 7 × 3W LED, 3000K | Living room, stairwell |
Click the diagram to enlarge the dimensions.
Click to enlarge ↗
| Material | Iron, Natural alabaster |
| Body finish | Brass, black, or brushed nickel |
| Shade finish | White (natural alabaster) |
| Light source | 7 × 3W LED, 3000K warm white (21W total) |
| Voltage | AC 110–240V (universal) |
| Mounting | Hardwired wall mount |
| Moisture rating | IP20 — indoor, dry locations only |
| Width | 12″ (300 mm) |
| Wall projection | 7.5″ (190 mm) |
| Height | 16″ (400 mm) |
| Recommended room size | ~110–160 sq ft (10–15 m²) |
| Certification | Listed · North America · CE · SAA · SASO · KC |
- Hardwired wall install over a standard wall box — a licensed electrician is recommended.
- The sconce projects 7.5″ (190 mm) from the wall — allow clearance in hallways and walkways.
- For an entry or living room, center it about 60″–66″ from the floor; mount lower beside a bed.
- The globes are natural alabaster — veining and tone vary from piece to piece, which is inherent to the stone, not a defect.
- Built-in 3000K warm-white LEDs come as a matched set; contact us for replacement globes if ever needed.
- Dust with a dry, soft cloth; do not use water or solvents on the alabaster.
What are the globe shades made of?
Natural alabaster. Each globe is cut from real stone, so the veining and tone are unique to every piece, and the translucent stone glows softly when lit.
How much light does it give, and what room suits it?
Seven 3W LEDs at 3000K (21W total) give a soft, warm ambient glow rather than bright task light. It suits a ~110–160 sq ft (10–15 m²) entryway, bedroom, hallway, or living room.
What finishes are available?
Brass (pictured), black, and brushed nickel. Email us your finish choice and room to confirm before ordering.
How far does it stick out, and how high should I mount it?
It projects 7.5″ (190 mm) from the wall, so allow clearance in walkways. For an entry or living room, center it about 60″–66″ from the floor; lower beside a bed. It hardwires to a standard wall box.
What's the warranty, and can the LEDs be replaced?
2-year warranty on the fixture and LEDs. The alabaster LED globes come as a matched set and are serviced by us — email support for replacements.
Sizing & questions
Every piece is made to order in our own atelier — here is what most clients ask before choosing theirs.
What are the globes made of?+
Natural alabaster stone. Each globe is cut from real stone, so veining and tone vary from piece to piece—inherent to the material, not a defect. The translucent stone glows warmly when lit.
How much light does it provide, and what size room suits it?+
Seven 3W LEDs at 3000K (21W total) deliver soft, warm ambient glow rather than task light. Best for ~110–160 sq ft rooms: entryways, bedrooms, hallways, or living rooms.
How far does it project from the wall, and where should I mount it?+
Projects 7.5″ from the wall—allow clearance in walkways and hallways. For entries or living rooms, center it 60″–66″ from the floor; mount lower beside a bed. Hardwires to a standard wall box.
Can the LED globes be replaced?+
The alabaster LED globes come as a matched set. Contact our team for replacement globes if needed. Dust the alabaster with a dry, soft cloth; do not use water or solvents.
Downloads
If it is a product quality problem or transportation damage, we will provide free return and exchange services, ensuring a hassle-free experience for our customers. Read the full Return & Refund Policy; if your order arrives damaged, see what to do when you receive a damaged item (report within 72 hours) and our shipping & tracking guide.
Design with confidence: Vakkerlight 3D Lighting Design Service
Take the guesswork out of lighting design. Whether for residential or commercial spaces, our 3D Lighting Design Service lets you visualize and customize fixtures in a realistic 3D environment before you buy.
- Personalized solutions: custom arrangements tailored to your exact space.
- True-to-life 3D: see how your fixtures will look before installation.
- Expert support: 1-on-1 guidance from our design specialists.
Resources & support: visit the 3D Lighting Design Service page to learn more. Need 3D Max files or detailed product parameters? Email info@vakkerlight.com and our team will be happy to assist you.
Product cut sheets (Google Drive) →
Welcome to Vakkerlight’s 3D Services. We pride ourselves on offering comprehensive design support to meet all your lighting needs. If you require 3D drawings, CAD plans or space design services, our experienced support team is here to help — email info@vakkerlight.com.
