Dome Alabaster Table Lamp
VKT4-2656-04
- In stock, ready to ship
A small sculptural accent lamp built from a natural alabaster drum on a slim alabaster pedestal, capped with a polished brass dome. Light comes from inside the alabaster drum and passes outward through the stone, casting a warm glow that picks up the natural amber veining and translucent cloud patterns unique to each piece.
At ⌀9.8″ × H9.8″, Dome is sized as a bedside accent, nightstand companion, vanity light, or quiet desk-corner glow. Plug-and-play with a 5 ft cord and an inline switch, and ships with an E27 LED pre-installed — set it down, plug it in, switch it on.
Glowing Alabaster Drum
Light passes through the natural alabaster — warm, diffused, with visible cloud-like veining unique to each piece.
Brass-Plated Dome
Polished brass-plated iron dome on top — a small sculptural accent that catches light from across a room.
E27 LED Pre-Installed
Ships with a 2700K warm-white E27 LED — replaceable when needed. No bulb to buy on day one.
Natural alabaster — every lamp is one of a kind
Each piece is cut from a unique alabaster block, so vein direction, cloud pattern, and translucency vary between lamps. The piece you receive will not be vein-identical to the photo — natural variation is part of the stone's character.
About the brass-plated dome
The dome is brass-plated iron — finished to a polished brass tone. It's not solid brass. With normal indoor use the finish stays bright; over many years, slight surface patina can develop on plated finishes, especially in humid rooms. Keep the lamp in dry indoor conditions and wipe gently with a dry soft cloth to maintain the finish.
Designed for ambient mood light
Dome is sized as an accent and atmosphere lamp — beautiful as a soft second light beside a bed, on a nightstand, or in a vanity corner. Pair with a brighter task lamp if you read in the same spot.
E27 LED — pre-installed and replaceable
The included E27 LED is rated for roughly 25,000 hours of normal use. When it eventually needs replacing, simply lift the dome and swap in a standard E27 LED bulb — no proprietary parts. If you have any questions, please contact our customer support team.
| Materials | Natural Alabaster · Brass-Plated Iron |
| Light source | 1 × E27 LED · 2700K warm white Pre-installed · replaceable |
| Bulb equivalent | ~40W incandescent |
| Rated LED life | ~25,000 hours |
| Dimensions | ⌀9.8″ × H9.8″ ⌀25 × 25 cm |
| Voltage | AC 110–240V |
| Cord | 5 ft (1.5 m) with inline switch |
| Wiring | Plug-and-play · standard wall outlet |
| Control | Inline cord switch · on/off Not dimmable |
| Mounting | Tabletop |
| IP rating | IP20 · Indoor dry locations only · Not waterproof |
| Certification | North America · EU · AU · Saudi Arabia |
| Stone finish | Natural alabaster (warm white with amber veining) |
| Metal finish | Polished brass-plated iron |
| Best for | Bedside · Nightstand · Vanity · Office desk corner · Console accent · Shelf accent |
- Plug-and-play — no electrician required. Connect to a standard wall outlet.
- Place on a flat, dry tabletop. Felt pads are included to protect the surface.
- Use the inline switch on the cord for on/off.
- For indoor dry locations only. Not suitable for bathrooms, showers, or damp rooms.
- Handle natural alabaster with care — it can chip or crack if dropped or struck.
Is the bulb included?
Yes — a 2700K warm-white E27 LED ships pre-installed. When it eventually needs replacing, any standard E27 LED bulb in the same wattage range will work.
Is the dome solid brass?
No — it's brass-plated iron, finished to a polished brass tone. Visually it reads as brass; structurally it's iron underneath. Keep it in dry indoor conditions to preserve the finish.
Will my lamp look exactly like the photo?
No two are identical. Alabaster vein direction, cloud pattern, and translucency vary between pieces — natural variation is part of what makes each lamp one of a kind.
Is it bright enough to read by?
Dome is designed for ambient mood lighting, not task light. The alabaster diffuses the LED into a soft, warm glow — beautiful as a bedside or vanity accent, but pair it with a brighter task lamp if you read in the same spot.
Is the lamp dimmable?
No. The inline cord switch is a simple on/off control. The included E27 LED is not dimmable.
Sizing & questions
Every piece is made to order in our own atelier — here is what most clients ask before choosing theirs.
What size is the Dome lamp and where does it work best?+
The lamp is ⌀9.8″ × H9.8″—compact and sculptural. It's designed as a bedside accent, nightstand companion, vanity light, or quiet desk-corner glow. Pair with a brighter task lamp if you read in the same spot.
Is there a bulb included and can I replace it later?+
Yes, a 2700K warm-white E27 LED ships pre-installed. It's rated for ~25,000 hours. When it needs replacing, simply lift the dome and swap in any standard E27 LED bulb—no proprietary parts.
How is each lamp unique?+
Every lamp is cut from a unique alabaster block, so vein direction, cloud pattern, and translucency vary between pieces. The one you receive will not be vein-identical to product photos—natural variation is part of the stone's character.
Is installation required and how do I set it up?+
No electrician needed. It's plug-and-play: set it on a flat, dry tabletop, connect to a standard wall outlet via the 5 ft cord, and use the inline switch to turn it on. Felt pads protect your surface.
How do I care for the brass dome?+
The dome is brass-plated iron. With normal indoor use, the finish stays bright. Keep the lamp in dry conditions and wipe gently with a dry soft cloth to maintain the polished finish.
Downloads
If it is a product quality problem or transportation damage, we will provide free return and exchange services, ensuring a hassle-free experience for our customers. Read the full Return & Refund Policy; if your order arrives damaged, see what to do when you receive a damaged item (report within 72 hours) and our shipping & tracking guide.
Design with confidence: Vakkerlight 3D Lighting Design Service
Take the guesswork out of lighting design. Whether for residential or commercial spaces, our 3D Lighting Design Service lets you visualize and customize fixtures in a realistic 3D environment before you buy.
- Personalized solutions: custom arrangements tailored to your exact space.
- True-to-life 3D: see how your fixtures will look before installation.
- Expert support: 1-on-1 guidance from our design specialists.
Resources & support: visit the 3D Lighting Design Service page to learn more. Need 3D Max files or detailed product parameters? Email info@vakkerlight.com and our team will be happy to assist you.
Product cut sheets (Google Drive) →
Welcome to Vakkerlight’s 3D Services. We pride ourselves on offering comprehensive design support to meet all your lighting needs. If you require 3D drawings, CAD plans or space design services, our experienced support team is here to help — email info@vakkerlight.com.
