Loop Minimalist Wall Light
V202006291401
- Standard Shipping to the United States
- Warranty Coverage Available
- 60-Day Returns on Eligible Items
- Customer Support by Email & Phone
- Personalized Customization Available
- Multiple Shipping Options Available
- Safe and Secure Payments
- Available in Region-Specific Electrical Options
- In stock, ready to ship
A plug-in wall sconce — no electrician needed. A small copper-finished disk mounts to the wall with two screws; a black braided cord drapes through a brass loop above and ends in an E26/E27 bulb socket below. 78.7″ cord with built-in switch plug — install in 5 minutes anywhere with a wall outlet. Ships with one test bulb so you can light it up immediately on arrival.
✓ No electrician, no wiring, no permission needed
This is a true plug-in wall sconce. Two small wall-anchor screws hold the brass disk; the cord runs to any standard outlet via a switch plug. Renters, apartment dwellers, dorm rooms, and anyone who cannot modify wiring — this works for you. To uninstall (when you move out), unscrew the two anchors and patch two small holes.
Plug-in install
5-minute mount with two screws + plug-in to wall outlet. No hardwiring, no junction box, no electrician.
Drape cord through loop
Black braided cord runs through a small brass loop above the disk — the loop holds the cord shape, the socket dangles at the bottom.
Test bulb included
Ships with one E26/E27 bulb pre-fitted for arrival testing. Swap to your preferred bulb anytime (LED, Edison filament, dimmable).
Single finish only. The copper baked-paint coat over the brass hardware reads warm and matches walnut, leather, marble, and brick interiors.
| Dimensions | Ø3.1″ disk × 12.6″ total height (8 × 32 cm) |
| Weight | ~2.2 lbs (1 kg) |
| Material | Copper-finished metal disk and loop · black braided cord · brass socket housing |
| Light source | E26 (NA & CA) or E27 (EU/AU) — max 40W. One test bulb included; LED bulbs recommended (sold separately for replacement) |
| Voltage | AC 110–240V (universal) |
| Mounting | Two screws into wall — anchors included. No hardwiring |
| Cord | 78.7″ (200 cm) with built-in switch plug; correct plug type ships per destination (NA/EU/AU/SA) |
| Control | Push-button switch on cord; dimming requires a dimmable bulb + a smart plug or switched dimmable outlet |
| Certification | North America, EU, Australia, Saudi Arabia |
| Warranty | 2 years on fixture and wiring |
Will my landlord/HOA have a problem with this?
No — it's a plug-in fixture, the same legal status as a floor lamp or table lamp. The only attachment to the wall is two small screws (about the size of a picture-hanging anchor); patching two holes on move-out takes 5 minutes. There's no electrical modification to the unit, so no permits or landlord approval are required for installation.
What bulb works best?
E26 socket — any standard LED or Edison bulb up to 40W. For the visible-filament look that suits the open socket, use a vintage-style Edison LED (ST64, G80, or G125 globe shape, 2700K, 4–6W). For a softer ambient glow, use a frosted A19 or G45 LED. The test bulb included is a basic warm-white LED — works on arrival, swap to your preferred style anytime.
Is it dimmable?
The cord has an on/off push switch only. To dim: install a dimmable LED bulb plus a smart plug (Lutron Caséta or TP-Link Kasa) — the bulb dims through the app or schedule. No rewiring needed.
Where can I install it — height, location?
The bulb hangs about 6″ below the mount point, so mount the disk approximately 54″ above the floor for a standard bedside-reading height. For above-couch ambient lighting, mount 60″ above the seat. Distance to the wall outlet matters too — the 78.7″ cord gives ~6.5 ft of reach, including some slack. Indoor dry locations only (not bathrooms or kitchens above stovetops).
What's the warranty?
2-year warranty on the fixture, finish, socket, cord, and switch. The included test bulb is consumable and not under warranty (it's a standard replaceable part). For any issue email info@vakkerlighting.com with photos.
If it is a product quality problem or transportation damage, we will provide free return and exchange services, ensuring a hassle-free experience for our customers.
PRODUCT CUT SHEET
Design with Confidence: Vakkerlight 3D Lighting Service
Take the guesswork out of lighting design. Whether for residential or commercial spaces, Vakkerlight’s innovative 3D Lighting Design Service lets you visualize and customize fixtures in a realistic 3D environment before you buy.
- Personalized Solutions: Custom arrangements tailored to your exact space.
- True-to-Life 3D: See how your fixtures will look before installation.
- Expert Support: Get 1-on-1 guidance from our design specialists.
Resources & Support:
Visit our [3D Lighting Design Service page] to learn more. Need 3D Max files or detailed product parameters? Email us at info@vakkerlight.com and our team will be happy to assist you.
