Gingko Drape Chandelier
VKC-240621-01
- Standard Shipping to the United States
- Warranty Coverage Available
- 60-Day Return and Exchange Policy
- Customer Support by Email & Phone
- Personalized Customization Available
- Safe and Secure Payments
- Estimated Delivery: 4-6 weeks.
- In stock, ready to ship
The Gingko Drape Chandelier is a porcelain ginkgo leaf chandelier on brass branches — available in two forms with 15 total configurations: Linear (L 31.5" to L 118.1") for dining tables, kitchen islands, banquet tables, and conference rooms, and Vertical (H 59.1" to H 157.5") for two-story foyers, grand staircases, stairwells, atriums, and double-height living rooms. 4 to 28 G9 (EU/AU) or E12 (US/CA) bulbs.
Gingko Drape Chandelier · installation walkthrough
▶ Watch — How to replace a lamp holder on the gingko chandelier⚠ Read before unboxing — small glue marks on the ginkgo leaves are normal
A small amount of glue is applied at the metal interface of each porcelain ginkgo leaf to keep the brass accessories securely attached during transit and long-term use. You may notice slight glue residue on some leaves — this is a normal part of production for stability and safety. It does not affect the gingko drape chandelier's appearance or function and is not a quality defect.
Porcelain Leaves + Brass
Hand-set porcelain ginkgo leaves drape along brass branches in flowing clusters.
2 Forms · 15 Configurations
Linear for tables, vertical for stairwells — same design language, two installations.
Banquet & Atrium Scale
Sized up to L 118" (linear) or H 157" (vertical) for hotels, restaurants, and grand homes.
Measurement guide — fan out branches for full silhouette
Listed dimensions refer to the total span with brass branches fanned out and all porcelain leaves installed. The branches are flexible — gently fan out the outermost branches by hand and install every leaf to reach the listed dimensions.
Indoor dry location only
The Gingko Drape Chandelier is rated for indoor dry locations. Do not install in bathrooms above a tub or shower, kitchens directly above a sink, or any covered or open outdoor area.
Confirm dimensions before ordering
For vertical configurations, keep 7+ ft headroom under the lowest leaf. For linear configurations, match the bar length to roughly 2/3 of the table or kitchen island length. Email info@vakkerlight.com if you need a custom length or cable extension.
| Size | Dimensions | Bulbs | Best Room |
|---|---|---|---|
| 80 cm | L 31.5" × W 17.7" (80 × 45 cm) | 4×G9 | 4-seat dining table, breakfast nook |
| 100 cm | L 39.4" × W 15.7" (100 × 40 cm) | 5×G9 | Standard dining room, kitchen island |
| 120 cm | L 47.2" × W 19.7" (120 × 50 cm) | 6×G9 | Long dining, larger kitchen island |
| 150 cm (narrow) | L 59.1" × W 21.7" (150 × 55 cm) | 10×G9 | 8-seat dining table |
| 150 cm (standard) | L 59.1" × W 23.6" (150 × 60 cm) | 10×G9 | 8-seat dining table, hotel dining |
| 150 cm (wide) | L 59.1" × W 27.6" (150 × 70 cm) | 10×G9 | 8-seat dining table, large island |
| 200 cm | L 78.7" × W 27.6" (200 × 70 cm) | 16×G9 | Long banquet table, hotel dining |
| 250 cm | L 98.4" × W 23.6" (250 × 60 cm) | 24×G9 | Conference room, hotel ballroom |
| 300 cm | L 118.1" × W 27.6" (300 × 70 cm) | 28×G9 | Conference room, restaurant statement |
| Size | Dimensions | Bulbs | Best Room |
|---|---|---|---|
| Size S | ∅31.5" × H59.1" (80 × 150 cm) | 10×G9 | 10-12 ft ceiling, single-story foyer, entryway |
| Size M | ∅39.4" × H70.7" (100 × 180 cm) | 16×G9 | 12-14 ft ceiling, two-story foyer |
| Size L | ∅39.4" × H78.7" (100 × 200 cm) | 28×G9 | 14-16 ft ceiling, grand staircase |
| Size XL | ∅47.2" × H98.4" (120 × 250 cm) | see spec sheet | 18-20 ft ceiling, double-height living room |
| Size XXL | ∅47.2" × H118.1" (120 × 300 cm) | see spec sheet | 22-25 ft ceiling, hotel atrium |
| Size XXXL | ∅59.1" × H157.5" (150 × 400 cm) | see spec sheet | 25-30 ft ceiling, stairwell void, grand hotel atrium |
| Materials | Metal · Porcelain (ceramic) |
| Light source | LED or Edison bulb (sold separately) |
| Base type | G9 (EU/AU) · E12 (US/CA) |
| Recommended bulb | Warm White 2700-3000K LED |
| Bulb count | 4, 5, 6, 10, 16, 24, or 28 bulbs depending on size |
| Voltage | AC 110-240V |
| Body finish | Gold (brass) |
| Shade finish | White porcelain ginkgo leaves |
| Cable | 59" adjustable · extendable on request |
| Mounting | Hardwired ceiling pendant |
| Control | Standard wall switch (not included) · dimmable with compatible bulb + dimmer |
| Environment | Indoor · dry locations only |
| Certification | North America · EU · Australia · Saudi Arabia |
- Hardwired ceiling install — use a licensed electrician.
- Confirm ceiling height + room dimensions before ordering.
- Hang Linear 30-36" above a table; keep Vertical 7+ ft headroom under lowest leaf.
- E12 (US/CA) or G9 (EU/AU) Warm LED bulb recommended.
Linear or Vertical — which Gingko Drape form should I pick?
Match the form to the room. Linear (L 31.5" to L 118.1") hangs above dining tables, kitchen islands, banquet tables, and conference rooms — pick a length about 2/3 of the surface below. Vertical (H 59.1" to H 157.5") drops through two-story foyers, stairwell voids, grand staircases, and double-height living rooms — match the drop to your ceiling height with at least 7 ft of headroom under the lowest leaf.
Which size fits my dining table or stairwell?
Linear / dining tables: 80cm for 4-seat, 100-120cm for standard 6-seat, 150cm for 8-seat, 200-300cm for banquet tables and conference rooms. Vertical / stairwells: Size S (H59.1") for 10-12 ft foyers, Size M (H70.7") for two-story foyers, Size L (H78.7") for grand staircases, Size XL-XXXL for double-height living rooms, hotel atriums, and stairwell voids up to 30 ft ceilings.
Why is there glue residue on some of the porcelain ginkgo leaves?
A small amount of glue is applied at the metal-leaf interface during production so the brass accessories stay securely attached through shipping and long-term use. Slight residue on some leaves is normal — it does not affect the gingko drape chandelier's appearance or function and is not a quality defect.
Why does the chandelier ship disassembled, and how hard is install?
To protect the delicate porcelain ginkgo leaves and brass branches during transit. After unpacking, an electrician hardwires the canopy to the ceiling, then the brass branches are fanned out and each porcelain leaf is attached one by one. The installation video linked above shows the full process. For larger sizes (vertical XL and up, or linear 200cm+), the install takes 2-4 hours.
What bulb does the Gingko Drape chandelier use, and is it dimmable?
E12 candelabra base for US/Canada or G9 bi-pin for EU/Australia. Bulb count matches the size — anywhere from 4 to 28 bulbs. Warm White 2700-3000K LED recommended for a soft glow across the porcelain ginkgo leaves. Bulbs sold separately. The gingko drape chandelier is dimmable when paired with dimmable LED bulbs and a compatible wall dimmer.
If it is a product quality problem or transportation damage, we will provide free return and exchange services, ensuring a hassle-free experience for our customers.
Vakkerlight offers an innovative 3D Lighting Design Service that brings a new level of customization to your lighting experience. Whether you're designing for a home, office, or commercial space, this service allows you to visualize and tailor lighting fixtures to your specific needs in a realistic 3D environment. With this service, Vakkerlight provides:
- Personalized Lighting Solutions: You can work with their design team to create custom lighting arrangements that suit the exact dimensions and style of your space.
- Detailed Visualization: The 3D service enables you to see how different lighting options will look in your room, giving you confidence in your selections before installation.
- Enhanced Customer Support: Vakkerlight’s design experts guide you through the process, offering suggestions and solutions based on your preferences and space requirements.
This service helps take the guesswork out of lighting design, ensuring that you select the perfect lighting fixtures for your home or business.
For more information, you can visit the official Vakkerlight 3D Lighting Design Service page.
For access to 3D Max files or detailed product parameters, kindly reach out to our support team at info@Vakkerlight.com. They will be more than happy to assist you.
