Torus Composite Ring Chandelier
VKC7-26919-01
- In stock, ready to ship
Complete the collection
$4,177.00
The Torus Composite Ring Chandelier is a sculptural ring pendant with each ring hand-carved and hand-polished from a gypsum/plaster-resin composite, suspended by a fanned spread of fine wires from a compact ceiling canopy. An integrated tri-color LED strip runs inside each ring, glowing softly through its inner edge. It's available as a Single Ring in 90 cm or 110 cm diameter, or as a Double-Tier Ring that stacks a 110 cm ring above a 90 cm ring for a bolder two-level silhouette.
Hand-carved composite ring
Each ring is hand-carved and hand-polished from a gypsum/plaster-resin composite, giving every piece soft, sculptural, one-of-a-kind surface texture.
Tri-color switchable LED
An integrated LED strip inside each ring switches between warm, neutral, and cool white light.
Single or double-tier ring
Choose a Single Ring at 90 cm or 110 cm, or a Double-Tier Ring that stacks both diameters for a bolder look.
| Canopy | Dia 15cm / ∅ 5.9″ |
| Suspension Chain | Default drop 10 cm / 3.9″ (customizable length) |
| Single Ring — 90 cm | Dia 90cm x H 50cm / ∅ 35.4″ x H 19.7″ |
| Single Ring — 110 cm | Dia 110cm x H 50cm / ∅ 43.3″ x H 19.7″ |
| Double-Tier Ring — 110+90 cm | Dia 110cm (upper) + 90cm (lower) x H 73cm / ∅ 43.3″ (upper) + 35.4″ (lower) x H 28.7″ |
| Lights | 1 × integrated tri-color LED ring strip (Single Ring options) or 2 × integrated tri-color LED ring strips (Double-Tier option), non-replaceable |
| Product Name | Torus Composite Ring Chandelier |
| Product Type | Chandelier/Pendant, Composite Ring, 3 size & configuration options |
| Material | Gypsum/Plaster-Resin Composite (hand-carved, hand-polished) |
| Finish | White, as shown; custom colors available on request as part of the hand-finishing process |
| Configuration Options | Single Ring 90 cm, Single Ring 110 cm, or Double-Tier Ring 110+90 cm |
| Overall Fixture Size | Dia 90cm x H 50cm / ∅ 35.4″ x H 19.7″ (Single 90); Dia 110cm x H 50cm / ∅ 43.3″ x H 19.7″ (Single 110); Dia 110+90cm x H 73cm / ∅ 43.3″+35.4″ x H 28.7″ (Double-Tier) |
| Light Source | Integrated LED ring strip, tri-color switchable (warm/neutral/cool white); 100W per ring (non-replaceable) |
| Included Bulb | Not applicable — the LED is built into each ring, not a separate replaceable bulb |
| Control | Not specified in the source listing — please confirm with us before ordering |
| Voltage / Dimmable | Not specified in the source listing |
| Canopy | Φ15 cm ceiling canopy with adjustable chain suspension (default drop 10 cm, customizable) |
| Mounting | Ceiling Chandelier, Multi-Wire Suspension |
| Environment | Indoor |
| Suitable Spaces | Dining table, living room, entryway, bedroom |
- Mount to a secure ceiling junction box using hardware rated for the fixture's weight; the Double-Tier configuration is heavier and may need additional support — installation should follow local electrical requirements.
- The chain drop can be trimmed or extended by an installer to suit ceiling height; default drop is 10 cm / 3.9″.
- Each ring's LED strip is integrated and non-replaceable; the control method (remote, wall switch, or otherwise) wasn't specified in the source listing — please confirm with us before ordering.
- As a hand-carved and hand-polished gypsum/plaster-resin composite, every ring has subtle one-of-a-kind surface texture — a natural result of the handcrafting process, not a defect.
- Dust gently with a soft, dry cloth or feather duster; avoid water, solvents, and abrasive cleaners, which can damage the composite surface and any custom-color finish.
- Handle with care during installation — the composite material can chip or crack under impact.
- Intended for indoor, dry use; avoid humid rooms, which can weaken the gypsum-based composite over time.
What is the Torus Chandelier made from?
Each ring is hand-carved and hand-polished from a gypsum/plaster-resin composite, giving it a soft, sculptural surface with natural handcrafted variation from piece to piece.
What size and configuration options are available?
A Single Ring at 90 cm or 110 cm diameter, or a Double-Tier Ring combining a 110 cm ring above a 90 cm ring for a bolder two-level silhouette.
Can I get it in a different color?
The default finish shown is white, but the hand-finishing process allows custom colors on request — please contact us to discuss options.
Does the light change color temperature?
Yes — each ring's integrated LED strip is tri-color switchable between warm, neutral, and cool white. The control method wasn't specified in the source listing, so please confirm with us before ordering.
Does it come with bulbs?
The LED is integrated into each ring rather than a separate replaceable bulb, so there's nothing extra to install — it's built in and ready to wire in.
How do I clean it?
Dust gently with a soft, dry cloth or feather duster. Avoid water, solvents, and abrasive cleaners, which can damage the composite surface, and keep it away from humid rooms.
Downloads
If it is a product quality problem or transportation damage, we will provide free return and exchange services, ensuring a hassle-free experience for our customers. Read the full Return & Refund Policy; if your order arrives damaged, see what to do when you receive a damaged item (report within 72 hours) and our shipping & tracking guide.
Design with confidence: Vakkerlight 3D Lighting Design Service
Take the guesswork out of lighting design. Whether for residential or commercial spaces, our 3D Lighting Design Service lets you visualize and customize fixtures in a realistic 3D environment before you buy.
- Personalized solutions: custom arrangements tailored to your exact space.
- True-to-life 3D: see how your fixtures will look before installation.
- Expert support: 1-on-1 guidance from our design specialists.
Resources & support: visit the 3D Lighting Design Service page to learn more. Need 3D Max files or detailed product parameters? Email info@vakkerlight.com and our team will be happy to assist you.
Product cut sheets (Google Drive) →
Welcome to Vakkerlight’s 3D Services. We pride ourselves on offering comprehensive design support to meet all your lighting needs. If you require 3D drawings, CAD plans or space design services, our experienced support team is here to help — email info@vakkerlight.com.
