Alabaster Layered Table Lamp
VKT02-26510-04
- In stock, ready to ship
Solid Spanish alabaster, hand-carved into a layered ribbed form — the shade stacked in flat horizontal tiers, the column twisted in a helical coil. When the three G9 LEDs illuminate, the alabaster reveals its inner geology: the translucent white stone glows from within, casting a warm halo of diffused light through every layer and vein. A brass fitting at the crown anchors the shade in place and adds a warm metallic contrast to the stone white. No two lamps share the same veining — each is a unique geological object.
Layered Alabaster Shade
Hand-carved horizontal tiers — each groove catches and scatters the warm LED glow from within.
Helical Ribbed Column
Base carved in a spiraling coil — the lit alabaster column glows from its interior upward.
Spanish Alabaster
Translucent, white-veined natural stone — glows warmly when lit, each piece unique.
3 × G9 LED
Three G9 bi-pin sockets inside the shade — bright, even illumination through the stone.
Brass Crown Fitting
Aged brass hardware at the top center — warm metallic accent against the stone white.
Plug-In
Standard wall outlet connection — no hardwiring or electrician required.
Spanish Alabaster — formed by nature, unique to each piece
The shade and base are carved from solid Spanish alabaster — a sedimentary gypsum stone formed through geological processes over millions of years. The translucency, white tone, and vein pattern of each piece differ from every other. Your lamp will share the same carved form as the photograph but carry its own singular geological pattern.
Natural pores, tonal variation & surface texture — inherent to alabaster
Alabaster naturally contains fine fissures, subtle tonal gradients, and surface texture variation formed during its geological development. These are authentic characteristics of genuine stone, not manufacturing defects. The stone's character becomes most visible — and most beautiful — when the lamp is illuminated.
G9 bulbs not included — 3 × G9 bi-pin sockets
This lamp uses three G9 bi-pin sockets inside the shade. G9 LED bulbs are available from most lighting retailers. Warm white (2700–3000K) is recommended to complement the alabaster's warm natural tone. Bulbs are not included.
| Materials | Spanish Alabaster (shade & column) · Metal iron hardware · Brass fitting |
| Dimensions | ∅30 cm × H25 cm / ∅11.8″ × H9.8″ |
| Light source | 3 × G9 bi-pin LED (not included) Warm white 2700–3000K recommended |
| Voltage | AC 110–240V |
| Wiring | Plug-in · standard wall outlet |
| Mounting | Tabletop |
| Hardware finish | Aged brass (crown fitting) |
| Stone color | White alabaster — natural veining varies per piece |
| IP rating | IP20 · Indoor dry locations only · Not waterproof |
| Certification | North America · EU · AU · Saudi Arabia |
- Plug-in — no electrician required. Connect to a standard wall outlet.
- Place on a flat, stable surface. The alabaster base is heavy solid stone — ensure the surface can support the weight.
- Install three G9 LED bulbs (not included) before first use. Warm white 2700–3000K is recommended.
- Do not exceed the recommended wattage for G9 bulbs. LED G9 bulbs are strongly preferred over halogen for heat management and longevity.
- Clean the stone with a soft dry cloth only. Do not use water, solvents, or abrasive cleaners on the alabaster.
- For indoor dry locations only. Not suitable for bathrooms or damp environments.
What makes the lamp glow — is it the stone itself or a separate shade?
Both the shade and the column are solid alabaster — the same material throughout. When the G9 LEDs inside the shade are lit, the light passes through the translucent stone, illuminating the veins and layers from within. The column also glows because the light travels through the alabaster of the base. There is no separate diffuser — the stone itself is the diffuser.
Will my lamp look exactly like the photo?
The carved form — layered shade tiers, helical column, brass crown — will match the photo closely. The alabaster's veining, translucency, and tonal character will differ, because each piece of stone is unique. The photograph shows a representative example; your lamp will carry its own geological signature.
What G9 bulbs should I use?
G9 LED capsule bulbs, warm white 2700–3000K. The warm tone enhances the alabaster's natural cream-white color and creates the characteristic golden glow through the stone. Avoid halogen G9 bulbs — they run much hotter and are less efficient. G9 LEDs are widely available from lighting retailers and online.
Is the alabaster fragile?
Alabaster is a relatively soft stone compared to granite or marble — it is more sensitive to impact and scratching. Handle with care during installation and cleaning. Place on a stable, flat surface and avoid moving it frequently. Clean only with a soft dry cloth; do not use water, vinegar, or chemical cleaners, which can etch or stain the stone.
Sizing & questions
Every piece is made to order in our own atelier — here is what most clients ask before choosing theirs.
What size is this table lamp and where will it fit?+
The lamp measures ∅11.8″ diameter × H9.8″ tall—compact for bedside tables, nightstands, desk corners, or side tables next to seating. The alabaster base is solid stone, so ensure your surface can support its weight.
What bulbs do I need and what color temperature is recommended?+
The lamp uses three G9 bi-pin LED bulbs (not included). Warm white 2700–3000K is recommended to complement the stone's natural cream tone and enhance the warm glow through the translucent alabaster.
Is each lamp the same, or does the stone pattern vary?+
Each lamp is hand-carved from solid Spanish alabaster, so no two share identical veining or tonal variation. Your piece will match the form shown but carry its own singular geological pattern—a natural characteristic of real stone.
How do I install this lamp?+
It's plug-in only—no hardwiring required. Connect to a standard wall outlet, place on a stable flat surface, then insert three G9 LED bulbs. The heavy stone base requires a surface that can support its weight safely.
Can I customize the size or finish?+
This model is ∅11.8″ × H9.8″ in white alabaster with aged brass fittings. Custom sizing and finishes are available through Vakkerlight's atelier—contact us to discuss made-to-order options for your space.
Downloads
If it is a product quality problem or transportation damage, we will provide free return and exchange services, ensuring a hassle-free experience for our customers. Read the full Return & Refund Policy; if your order arrives damaged, see what to do when you receive a damaged item (report within 72 hours) and our shipping & tracking guide.
Design with confidence: Vakkerlight 3D Lighting Design Service
Take the guesswork out of lighting design. Whether for residential or commercial spaces, our 3D Lighting Design Service lets you visualize and customize fixtures in a realistic 3D environment before you buy.
- Personalized solutions: custom arrangements tailored to your exact space.
- True-to-life 3D: see how your fixtures will look before installation.
- Expert support: 1-on-1 guidance from our design specialists.
Resources & support: visit the 3D Lighting Design Service page to learn more. Need 3D Max files or detailed product parameters? Email info@vakkerlight.com and our team will be happy to assist you.
Product cut sheets (Google Drive) →
Welcome to Vakkerlight’s 3D Services. We pride ourselves on offering comprehensive design support to meet all your lighting needs. If you require 3D drawings, CAD plans or space design services, our experienced support team is here to help — email info@vakkerlight.com.
