Loop Minimalist Wall Light
V202006291401
- In stock, ready to ship
A plug-in wall sconce — no electrician needed. A small copper-finished disk mounts to the wall with two screws; a black braided cord drapes through a brass loop above and ends in an E26/E27 bulb socket below. 78.7″ cord with built-in switch plug — install in 5 minutes anywhere with a wall outlet. Ships with one test bulb so you can light it up immediately on arrival.
✓ No electrician, no wiring, no permission needed
This is a true plug-in wall sconce. Two small wall-anchor screws hold the brass disk; the cord runs to any standard outlet via a switch plug. Renters, apartment dwellers, dorm rooms, and anyone who cannot modify wiring — this works for you. To uninstall (when you move out), unscrew the two anchors and patch two small holes.
Plug-in install
5-minute mount with two screws + plug-in to wall outlet. No hardwiring, no junction box, no electrician.
Drape cord through loop
Black braided cord runs through a small brass loop above the disk — the loop holds the cord shape, the socket dangles at the bottom.
Test bulb included
Ships with one E26/E27 bulb pre-fitted for arrival testing. Swap to your preferred bulb anytime (LED, Edison filament, dimmable).
Single finish only. The copper baked-paint coat over the brass hardware reads warm and matches walnut, leather, marble, and brick interiors.
| Dimensions | Ø3.1″ disk × 12.6″ total height (8 × 32 cm) |
| Weight | ~2.2 lbs (1 kg) |
| Material | Copper-finished metal disk and loop · black braided cord · brass socket housing |
| Light source | E26 (NA & CA) or E27 (EU/AU) — max 40W. One test bulb included; LED bulbs recommended (sold separately for replacement) |
| Voltage | AC 110–240V (universal) |
| Mounting | Two screws into wall — anchors included. No hardwiring |
| Cord | 78.7″ (200 cm) with built-in switch plug; correct plug type ships per destination (NA/EU/AU/SA) |
| Control | Push-button switch on cord; dimming requires a dimmable bulb + a smart plug or switched dimmable outlet |
| Certification | North America, EU, Australia, Saudi Arabia |
| Warranty | 2 years on fixture and wiring |
Will my landlord/HOA have a problem with this?
No — it's a plug-in fixture, the same legal status as a floor lamp or table lamp. The only attachment to the wall is two small screws (about the size of a picture-hanging anchor); patching two holes on move-out takes 5 minutes. There's no electrical modification to the unit, so no permits or landlord approval are required for installation.
What bulb works best?
E26 socket — any standard LED or Edison bulb up to 40W. For the visible-filament look that suits the open socket, use a vintage-style Edison LED (ST64, G80, or G125 globe shape, 2700K, 4–6W). For a softer ambient glow, use a frosted A19 or G45 LED. The test bulb included is a basic warm-white LED — works on arrival, swap to your preferred style anytime.
Is it dimmable?
The cord has an on/off push switch only. To dim: install a dimmable LED bulb plus a smart plug (Lutron Caséta or TP-Link Kasa) — the bulb dims through the app or schedule. No rewiring needed.
Where can I install it — height, location?
The bulb hangs about 6″ below the mount point, so mount the disk approximately 54″ above the floor for a standard bedside-reading height. For above-couch ambient lighting, mount 60″ above the seat. Distance to the wall outlet matters too — the 78.7″ cord gives ~6.5 ft of reach, including some slack. Indoor dry locations only (not bathrooms or kitchens above stovetops).
What's the warranty?
2-year warranty on the fixture, finish, socket, cord, and switch. The included test bulb is consumable and not under warranty (it's a standard replaceable part). For any issue email info@vakkerlighting.com with photos.
If it is a product quality problem or transportation damage, we will provide free return and exchange services, ensuring a hassle-free experience for our customers. Read the full Return & Refund Policy; if your order arrives damaged, see what to do when you receive a damaged item (report within 72 hours) and our shipping & tracking guide.
Design with confidence: Vakkerlight 3D Lighting Design Service
Take the guesswork out of lighting design. Whether for residential or commercial spaces, our 3D Lighting Design Service lets you visualize and customize fixtures in a realistic 3D environment before you buy.
- Personalized solutions: custom arrangements tailored to your exact space.
- True-to-life 3D: see how your fixtures will look before installation.
- Expert support: 1-on-1 guidance from our design specialists.
Resources & support: visit the 3D Lighting Design Service page to learn more. Need 3D Max files or detailed product parameters? Email info@vakkerlight.com and our team will be happy to assist you.
Product cut sheets (Google Drive) →
Welcome to Vakkerlight’s 3D Services. We pride ourselves on offering comprehensive design support to meet all your lighting needs. If you require 3D drawings, CAD plans or space design services, our experienced support team is here to help — email info@vakkerlight.com.
