Stacked Geometric Rice Paper Pendant Lamp
VKP7-26519-01
BLACK FRIDAY
Every light, sitewide
Ends Dec 5 · 11:59 PM ET
- In stock, ready to ship
A stacked geometric rice paper pendant lamp — four hand-folded multi-faceted polyhedra stacked vertically into a 63″ / 160cm sculptural column. Each face is hand-painted in a mix of tones (warm red, mustard, sky blue, ivory, matte black), so light glows through one color at a time as it falls down the form. Built on a steel internal frame with an E26/E27 base. Indoor only — for foyers, stairwells, lofts, and gallery-style rooms.
⚠ Use LED bulbs only
Rice paper is heat-sensitive. Use only LED bulbs (max 15W, E26/E27 base) — incandescent, halogen, or Edison-filament bulbs run hot enough to discolor or scorch the paper. A 2700K warm-white LED preserves the paper's natural tones.
4-tier polyhedron stack
Four hand-folded multi-faceted modules stacked into one continuous 63″ / 160cm vertical form.
Hand-painted multi-color faces
Warm red, mustard, sky blue, ivory, matte black. Light glows through one color at a time as it falls down the form.
E26/E27 · LED-only
Standard medium base on a steel internal frame. LED bulbs only for paper safety.
Custom color palette
The default palette is hand-painted as pictured. Solid-white, solid-ivory, and monochrome black-and-white variants are available on request. Email us for a custom palette before production.
| Size | Ø 15″ x H 63″ / Dia 38cm x H 160cm |
| Floor clearance | At least 84″ / 7 ft below the fixture |
Click to enlarge
| Material | Hand-folded rice paper · steel internal frame |
| Body Finish | Steel internal frame |
| Shade Finish | Hand-painted rice paper — warm red, mustard, sky blue, ivory, matte black (as pictured) |
| Dimensions | Ø 15″ x H 63″ / Dia 38cm x H 160cm |
| Light source | E26/E27 medium base — LED only, max 15W |
| Voltage | AC 110–240V |
| Control | Wall switch; dimmable with a dimmable LED bulb and compatible dimmer |
| Mounting | Hardwired, ceiling-suspended on internal steel armature |
| Certifications | CE (EU) · SAA/RCM (Australia & NZ) · CSA (Canada) · FCC tested (US) — see certificates |
- Hardwired ceiling install — a licensed electrician is recommended.
- Plan ceiling height accordingly: the lamp is 63″ / 160cm tall before cable. Allow at least 84″ / 7 ft between the fixture bottom and the floor for foyer or stairwell installs.
- Use LED bulbs only (max 15W). Incandescent, halogen, or Edison-filament bulbs run hot enough to discolor or scorch the paper.
- Indoor dry location only. Do not install in bathrooms, above a stove, or in any humid area — paper warps and discolors with humidity.
- Keep at least 12″ / 30cm clear of curtains, drapes, or other paper surfaces for fire safety.
- Rice paper is hand-folded and hand-painted — minor texture variations, fold-line softness, and brush-stroke marks are characteristic of the process, not defects.
Can I use Edison-filament or incandescent bulbs?
No — LED bulbs only, max 15W. Rice paper is heat-sensitive: incandescent and Edison-filament bulbs run at surface temperatures that can scorch or discolor paper over time. A 2700K warm-white E26/E27 LED gives the warmest glow without the heat risk.
How much room does this need?
The lamp is Ø 15″ x H 63″ / Dia 38cm x H 160cm before the cable. Plan on at least 7 ft / 84″ between the fixture bottom and the floor, so 12–14 ft ceilings are ideal. It also reads well dropping through a two-story stairwell or open foyer where the full vertical form is visible.
How do I clean it, and what if a panel tears?
Dust with a soft dry brush only — no water, no cleaners, and no microfiber cloth, as the fibers catch on the paper texture. If a panel tears, email info@vakkerlighting.com with your order number; individual panels can be replaced rather than the whole fixture.
Can I get a different color palette?
Yes. Solid-white, solid-ivory, and monochrome black-and-white variants are available on request, and other palettes can be made to order. Email info@vakkerlighting.com with reference colors before placing the order.
Is it dimmable?
Yes, when paired with a dimmable LED bulb and a compatible wall dimmer rated for the LED load (15W or less).
Sizing & questions
Here is what most clients ask before choosing theirs.
Are custom color palettes available?+
Yes. The default is the hand-painted palette shown. Solid-white, solid-ivory, and black-and-white variants are available on request. Email info@vakkerlighting.com before production to order a custom palette.
Is this fixture dimmable?+
Yes, with a dimmable LED bulb (max 15W) and a compatible wall dimmer rated for the LED load.
What is involved in installation?+
It is hardwired and ceiling-suspended on an internal steel armature. A licensed electrician is recommended. Keep 12″ / 30cm clearance from curtains and paper surfaces for fire safety.
Downloads
If it is a product quality problem or transportation damage, we will provide free return and exchange services, ensuring a hassle-free experience for our customers. Read the full Return & Refund Policy; if your order arrives damaged, see what to do when you receive a damaged item (report within 72 hours) and our shipping & tracking guide.
Design with confidence: Vakkerlight 3D Lighting Design Service
Take the guesswork out of lighting design. Whether for residential or commercial spaces, our 3D Lighting Design Service lets you visualize and customize fixtures in a realistic 3D environment before you buy.
- Personalized solutions: custom arrangements tailored to your exact space.
- True-to-life 3D: see how your fixtures will look before installation.
- Expert support: 1-on-1 guidance from our design specialists.
Resources & support: visit the 3D Lighting Design Service page to learn more. Need 3D Max files or detailed product parameters? Email info@vakkerlight.com and our team will be happy to assist you.
