Marble Sphere Table Lamp
VKT26529-04
- In stock, ready to ship
This marble table lamp stacks four veined white spheres on a round marble base, joined by slim brass-tone spacers and topped with an 11.8″ (30 cm) tapered fabric shade. At 29.5″ (75 cm) tall, it suits a nightstand, console, or desk of 54–108 sq ft.
Stacked marble column
Four solid marble spheres set on a round marble base, joined by brass-tone metal collars.
Natural veining
Gray-and-white marble pattern shifts piece to piece, so no two lamps look identical.
Tapered fabric shade
11.8″ off-white empire shade diffuses an E27 bulb into a soft warm pool for bedside or task use.
E27 bulb sold separately
Uses one standard E27 (Edison screw) bulb up to 9W LED, warm-white recommended. Bulb is not included so you can match the color temperature you prefer.
White marble, as shown
Ships in the white marble finish pictured with brass-tone metal collars and an off-white fabric shade. For project quantities, email us before ordering.
Click the diagram to enlarge.
| Dimensions | 11.8″ shade dia × 29.5″ H (30 × 75 cm) |
| Material | Marble, Metal, Fabric |
| Color | White marble with brass-tone collars |
| Base | Round marble base |
| Light source | 1 × E27 socket · up to 9W LED · bulb sold separately |
| Voltage | 120V (AC 110–240V global) |
| Coverage | 54–108 sq ft (5–10 m²) |
| Switch | In-line cord on/off |
| Cord | Approx. 6 ft plug-in cord |
| Mount | Free-standing, indoor dry locations |
| Certification | Listed · North America · CE · SAA · SASO · KC |
- Place on a flat, stable surface that can support a solid marble lamp; the base is weighted.
- Attach the shade with the included harp and finial; route the cord behind the surface edge.
- Plug into a standard outlet and use the in-line cord switch to turn on and off.
- Install one E27 bulb up to 9W LED, warm-white recommended. Do not exceed the listed wattage.
- Indoor dry locations only — not rated for bathrooms, porches, or outdoor use.
- Wipe the marble with a dry, soft cloth; avoid acidic or abrasive cleaners that can etch stone.
What bulb does this table lamp need and is it included?
The lamp uses one standard E27 (Edison screw) bulb up to 9W LED and the bulb is not included. We recommend a warm-white LED of 700–800 lumens for bedside reading or ambient use.
How tall is it and where does it fit best?
It stands 29.5″ (75 cm) tall with an 11.8″ (30 cm) shade. It suits a nightstand, console, or desk in a bedroom, living room, or study of 54–108 sq ft.
How do I turn it on and is it dimmable?
An in-line on/off switch sits on the cord. The lamp itself is not dimmable, but you can pair it with a dimmable E27 LED bulb and a plug-in dimmer module if you want dimming.
Will the marble veining match the photo exactly?
No. The spheres and base are cut from natural marble, so the gray-and-white veining pattern varies piece to piece. The photo is representative rather than exact.
How do I clean the marble and the shade?
Wipe the marble with a dry, soft cloth; avoid acidic, citrus, or abrasive cleaners that can etch the stone. Dust the fabric shade with a soft brush or lint roller. Email support with any care questions.
Sizing & questions
Every piece is made to order in our own atelier — here is what most clients ask before choosing theirs.
What bulb does this lamp use and is it included?+
One standard E27 (Edison screw) bulb up to 9W LED; bulb sold separately. We recommend warm-white LED, 700–800 lumens, for bedside reading or ambient light.
How tall is it and where does it fit best?+
29.5″ tall with an 11.8″ shade diameter. Best for nightstands, consoles, or desks in bedrooms, living rooms, or studies of 54–108 sq ft.
Will the marble veining look exactly like the photo?+
No. Each lamp's spheres and base are cut from natural marble, so gray-and-white veining varies piece to piece. The photo is representative, not exact.
How do I clean the marble and shade?+
Wipe marble with a dry, soft cloth; avoid acidic or abrasive cleaners that etch stone. Dust the fabric shade with a soft brush or lint roller.
Can I dim this lamp?+
The lamp has an in-line on/off cord switch. Pair it with a dimmable E27 LED bulb and plug-in dimmer module for dimming control.
Downloads
If it is a product quality problem or transportation damage, we will provide free return and exchange services, ensuring a hassle-free experience for our customers. Read the full Return & Refund Policy; if your order arrives damaged, see what to do when you receive a damaged item (report within 72 hours) and our shipping & tracking guide.
Design with confidence: Vakkerlight 3D Lighting Design Service
Take the guesswork out of lighting design. Whether for residential or commercial spaces, our 3D Lighting Design Service lets you visualize and customize fixtures in a realistic 3D environment before you buy.
- Personalized solutions: custom arrangements tailored to your exact space.
- True-to-life 3D: see how your fixtures will look before installation.
- Expert support: 1-on-1 guidance from our design specialists.
Resources & support: visit the 3D Lighting Design Service page to learn more. Need 3D Max files or detailed product parameters? Email info@vakkerlight.com and our team will be happy to assist you.
Product cut sheets (Google Drive) →
Welcome to Vakkerlight’s 3D Services. We pride ourselves on offering comprehensive design support to meet all your lighting needs. If you require 3D drawings, CAD plans or space design services, our experienced support team is here to help — email info@vakkerlight.com.
