Branch Wood Linear Pendant Light
VKP1-26525-01
BLACK FRIDAY
Every light, sitewide
Ends Dec 5 · 11:59 PM ET
- In stock, ready to ship
A branch wood linear LED pendant, shaped as a slim lit bar with twig-like forks reaching out from each end. The integrated LED runs along the center bar for a warm 2700K line of light, while the open branches keep the piece sculptural and airy. Choose the longer wood-color version or the shorter walnut-color version, both on an adjustable black cable — a quiet, nature-drawn accent for dining tables, kitchen islands, and entryways.
If you have any questions about our products, please get in touch with us at info@vakkerlighting.com and we will reply to you within 24 hours.
Natural wood — every fixture is one of a kind
Real wood grain, tone, and figure vary from piece to piece. The photos show a representative sample, not the exact fixture shipped — variation is a mark of real wood, not a defect.
Branch silhouette
A lit center bar with twig-like forks at each end — organic and sculptural.
Lit center bar
The integrated LED runs along the main bar: 20W (1,600 lm) or 10W (800 lm).
Warm 2700K light
Relaxed warm white for dining rooms and quiet spaces.
| Version | Size (W x H) | Power | Best for |
|---|---|---|---|
| Wood color | W 65″ x H 13.4″W 165cm x H 34cm | 20W · 1,600 lm | Larger tables and islands |
| Walnut color | W 50.4″ x H 13.4″W 128cm x H 34cm | 10W · 800 lm | Smaller tables and entryways |
The forks reach wider than the lit bar, so allow extra clearance at each end. Unsure which version fits, or need a custom size? Email us your table size for a free recommendation.
Click any diagram to enlarge
| Material | Wood, metal |
| Body Finish | Wood color or walnut color (by version) · black cable |
| Shade Finish | Wood-tone branch bar with frosted LED diffuser strip |
| Sizes | Wood color: W 65″ x H 13.4″ / W 165cm x H 34cm Walnut color: W 50.4″ x H 13.4″ / W 128cm x H 34cm |
| Light Source | Integrated LED · 2700K warm white |
| Power | Wood color: 20W · 1,600 lm · Walnut color: 10W · 800 lm |
| Voltage | AC 110–240V |
| Control | Wall switch |
| Installation | Hardwired ceiling mount, adjustable black cable |
| Environment | IP20 · Indoor, dry locations only |
| Certification | Compatible with North America, Saudi Arabia, Europe, Australia Certification |
- Hardwired ceiling installation — a licensed electrician is recommended.
- Hang the bar 30–36″ above a dining table; raise it for kitchen islands or walkways.
- The branches reach wider than the lit bar — check clearance to walls and cabinets before fixing the canopy.
- The black cable adjusts at the canopy; feed excess cable into the ceiling box to level the bar.
- For a sloped or vaulted ceiling, email us the pitch angle before ordering.
What's the difference between the two versions?
The wood-color version is the longer one — W 65″ / 165cm with a 20W LED (1,600 lm) — for larger tables and islands. The walnut-color version is W 50.4″ / 128cm with a 10W LED (800 lm) and a deeper tone, for smaller tables and entryways. Both share the same branch silhouette and warm 2700K light.
Is it bright enough to light a dining table?
It works best as a warm accent and gentle table light rather than the only task light. For bright work lighting, pair it with recessed or under-cabinet lights nearby.
How much clearance do the branches need?
The forks reach wider than the lit bar, so leave room at each end before fixing the canopy. Both versions stand H 13.4″ / 34cm. Email info@vakkerlighting.com with your space and we will confirm the fit.
Can this mount on a sloped or vaulted ceiling?
The standard canopy suits flat ceilings. For a sloped or vaulted ceiling, email us the pitch angle before ordering and we will advise on a suitable canopy.
How high should I hang it?
Hang it 30–36″ above a dining table, and higher over kitchen islands or walkways. The black cable adjusts at the canopy.
Downloads
If it is a product quality problem or transportation damage, we will provide free return and exchange services, ensuring a hassle-free experience for our customers. Read the full Return & Refund Policy; if your order arrives damaged, see what to do when you receive a damaged item (report within 72 hours) and our shipping & tracking guide.
Design with confidence: Vakkerlight 3D Lighting Design Service
Take the guesswork out of lighting design. Whether for residential or commercial spaces, our 3D Lighting Design Service lets you visualize and customize fixtures in a realistic 3D environment before you buy.
- Personalized solutions: custom arrangements tailored to your exact space.
- True-to-life 3D: see how your fixtures will look before installation.
- Expert support: 1-on-1 guidance from our design specialists.
Resources & support: visit the 3D Lighting Design Service page to learn more. Need 3D Max files or detailed product parameters? Email info@vakkerlight.com and our team will be happy to assist you.
Product cut sheets (Google Drive) →
Welcome to Vakkerlight’s 3D Services. We pride ourselves on offering comprehensive design support to meet all your lighting needs. If you require 3D drawings, CAD plans or space design services, our experienced support team is here to help — email info@vakkerlight.com.
