Stretch Fabric Petal Flush Mount
VKC7-2673-01
- In stock, ready to ship
Frequently bought together
CHF 117.00
CHF 131.00
CHF 164.00
CHF 282.00
A flush mount ceiling light with a pleated stretch-fabric shade shaped into overlapping petal segments — the fabric pulls and gathers at the center, creating natural tension folds across the surface that catch light differently at different angles. The center cap is turned solid walnut with a brass-tone hardware fastener — a small material detail visible from below that keeps the fixture grounded in warm, furniture-grade materials. At H 5.9″ / 15cm the profile sits close to the ceiling and works in standard 8 ft / 2.4 m rooms without any drop. Integrated LED — no bulb required. Three sizes: Ø 15.7″ (22W), Ø 19.7″ (32W), and Ø 23.6″ (48W).
If you have any questions about our products, please get in touch with us at info@vakkerlighting.com and we will reply to you within 24 hours.
Unlit, the pleats read as soft texture; lit, the fabric glows evenly from within · tap to enlarge
Integrated LED panel — no bulb required
The LED light source is an SMD panel built into the fixture, so no separate bulb is needed. Rated LED lifespan is typically 25,000+ hours under normal use.
Hardwired ceiling install — flush mount
This fixture hardwires directly to the ceiling junction box. It is not plug-in. A licensed electrician is recommended. Turn off power at the breaker before installation. Confirm your ceiling box is positioned at the correct location — flush mount fixtures cannot be repositioned after hardwiring.
Pleated stretch fabric
Stretch fabric pulled into overlapping petal segments — the material gathers at the center and fans outward, creating natural tension folds that shift in appearance under different light angles.
Integrated LED · no bulb
An SMD LED panel is built into the fixture — no bulb to source or install. Restore power at the breaker after installation and it is ready.
Solid walnut center · H 5.9″
A turned walnut cap with a brass-tone fastener closes the center of the shade. At H 5.9″ / 15cm, the profile stays close to the ceiling and suits standard room heights.
| Size | Dimensions | Wattage | Room coverage | Best for |
|---|---|---|---|---|
| Small | Ø 15.7″ x H 5.9″ / Dia 40cm x H 15cm | 22W | 108–140 sq ft / 10–13 m² | Bedroom, study, hallway, compact living room |
| Medium | Ø 19.7″ x H 5.9″ / Dia 50cm x H 15cm | 32W | 140–172 sq ft / 13–16 m² | Bedroom, dining area, living room, open study |
| Large | Ø 23.6″ x H 5.9″ / Dia 60cm x H 15cm | 48W | 172–194 sq ft / 16–18 m² | Living room, dining room, primary bedroom, open-plan space |
Tap any diagram to enlarge
Stretch fabric shade · solid walnut center cap · brass-tone hardware · metal frame
The shade is constructed from stretch fabric pulled over a metal petal-segment frame. Each segment fans outward from the center, and the tension in the fabric creates natural gather lines across the surface — not printed or embossed, but physically formed by how the fabric sits under tension. The center is capped with a solid walnut turned disc, finished with a small brass-tone fastener. Off-white fabric against walnut brown keeps the palette warm and neutral. The metal frame mounts flush to the ceiling junction box.
Integrated SMD LED panel · 22W / 32W / 48W
An SMD LED panel sits inside the fixture — 22W for the Small, 32W for the Medium, and 48W for the Large. It diffuses light evenly across the stretch fabric from behind, lighting the gather folds from within. As an integrated light source, there is no socket and no bulb to change.
| Material | Stretch fabric shade · solid walnut center cap · metal frame · brass-tone hardware |
| Body Finish | Walnut center cap · brass-tone hardware |
| Shade Finish | Off-white stretch fabric |
| Sizes | Small: Ø 15.7″ x H 5.9″ / Dia 40cm x H 15cm Medium: Ø 19.7″ x H 5.9″ / Dia 50cm x H 15cm Large: Ø 23.6″ x H 5.9″ / Dia 60cm x H 15cm |
| Light source | Integrated SMD LED panel |
| Wattage | Small: 22W · Medium: 32W · Large: 48W |
| Color temperature | Warm white 3000K |
| Voltage | AC 110–240V |
| Control | Wall switch |
| Mounting | Flush mount · hardwired to ceiling junction box |
| Room coverage | 108–194 sq ft / 10–18 m², depending on size |
| IP rating | IP20 — indoor, dry locations only |
| LED lifespan | 25,000+ hours |
| Certification | Compatible with North America, Saudi Arabia, Europe, Australia Certification |
Default configuration
Select size at checkout. Single colorway: walnut + off-white fabric. Email us for trade or bulk pricing.
- Turn off power at the breaker before installation. A licensed electrician is recommended for all hardwired ceiling connections. Confirm the junction box position suits the room layout before hardwiring, as the fixture cannot be repositioned afterward.
- The LED panel is built in — no bulb assembly is required. After installation, restore power at the breaker and the fixture is ready to use.
- Stretch fabric shade: dust with a soft brush or low-suction vacuum brush attachment. Do not wet-clean, iron, or steam — heat and moisture can distort the tension folds. Not for bathrooms or other humid rooms.
- Solid walnut center cap: wipe with a dry cloth only. Avoid water and oil-based polish, which can darken or strip the wood finish. Brass-tone hardware fastener: dry cloth only.
- Metal frame: dry microfiber cloth. Avoid liquid cleaners and abrasive pads.
Does it need a bulb?
No. An integrated SMD LED panel is built into the fixture (22W for the Small, 32W for the Medium, and 48W for the Large) — there is no socket and no separate bulb to buy or install. Rated lifespan is typically 25,000+ hours under normal use, roughly 11+ years at 6 hours a day.
Which size should I choose?
The Small (Ø 15.7″ / Dia 40cm, 22W) suits a bedroom, study, or hallway of about 108–140 sq ft. The Medium (Ø 19.7″ / Dia 50cm, 32W) works as the main ceiling light in a 140–172 sq ft bedroom or dining area. The Large (Ø 23.6″ / Dia 60cm, 48W) anchors a 172–194 sq ft living room, primary bedroom, or open dining space. All three share the same H 5.9″ / 15cm profile.
What does the light look like on and off?
Unlit, it reads as a softly pleated off-white dome with natural gather lines radiating from the walnut center cap. Lit, the LED panel glows evenly through the fabric and the fold lines appear as gentle shadows across the surface — see the on/off comparison image above.
Will this work in a standard 8-foot ceiling room?
Yes. At H 5.9″ / 15cm it sits flush against the ceiling with no pendant drop, so it suits standard 8 ft / 2.4 m residential ceilings with ample clearance below for all three sizes.
How do I clean the fabric shade?
Dust with a soft brush or a low-suction vacuum brush attachment. Do not wet-clean, iron, or steam the fabric — heat and moisture can distort the tension folds. Wipe the walnut cap and brass-tone hardware with a dry cloth only.
Sizing & questions
Here is what most clients ask before choosing theirs.
Which size should I choose for my bedroom or living room?+
Small (Ø 15.7″) covers 108–140 sq ft bedrooms and compact spaces. Medium (Ø 19.7″) suits 140–172 sq ft bedrooms, dining areas, and open studies. Large (Ø 23.6″) works best in 172–194 sq ft living rooms, dining rooms, and open-plan primary bedrooms.
Will this fixture work in a standard 8 ft ceiling?+
Yes. At H 5.9″, the Petal Flush Mount sits close to the ceiling and is designed for standard 8 ft / 2.4 m rooms without requiring any drop from the ceiling.
Do I need to buy a light bulb separately?+
No. The fixture uses an integrated LED panel built into the fixture, so there is no bulb to buy or install.
How is this fixture installed?+
It hardwires directly to your ceiling junction box as a flush mount. A licensed electrician is recommended. Turn off power at the breaker before installation and confirm the ceiling box location, as the fixture cannot be repositioned after hardwiring.
Can I order a custom size?+
The Petal Flush Mount is available in three fixed sizes. For custom dimensions or other modifications, email info@vakkerlighting.com to discuss made-to-order options for your space.
Downloads
If it is a product quality problem or transportation damage, we will provide free return and exchange services, ensuring a hassle-free experience for our customers. Read the full Return & Refund Policy; if your order arrives damaged, see what to do when you receive a damaged item (report within 72 hours) and our shipping & tracking guide.
Design with confidence: Vakkerlight 3D Lighting Design Service
Take the guesswork out of lighting design. Whether for residential or commercial spaces, our 3D Lighting Design Service lets you visualize and customize fixtures in a realistic 3D environment before you buy.
- Personalized solutions: custom arrangements tailored to your exact space.
- True-to-life 3D: see how your fixtures will look before installation.
- Expert support: 1-on-1 guidance from our design specialists.
Resources & support: visit the 3D Lighting Design Service page to learn more. Need 3D Max files or detailed product parameters? Email info@vakkerlight.com and our team will be happy to assist you.
Product cut sheets (Google Drive) →
Welcome to Vakkerlight’s 3D Services. We pride ourselves on offering comprehensive design support to meet all your lighting needs. If you require 3D drawings, CAD plans or space design services, our experienced support team is here to help — email info@vakkerlight.com.
