Cone Swing Arm Plug-in Wall Sconce
VKPW-26824-05
- In stock, ready to ship
Frequently bought together
$253.00
$213.00
$253.00
The Cone Swing-Arm Wall Sconce pairs a small cone shade with a two-segment swing arm, all in glossy painted iron. The arm folds close to the wall or reaches about 19.7″ / 50cm into the room, making it a directional reading light beside a bed, sofa, or armchair. It plugs into a standard outlet and switches on with an inline switch on the cord — no hardwiring needed. Choose Black, Orange, or Cherry Red.
If you have any questions about our products, please get in touch with us at info@vakkerlighting.com and we will reply to you within 24 hours.
Plug-in sconce — no electrician needed
Screw the baseplate to the wall, plug the cord into a standard outlet, and use the inline switch on the cord. No junction box or wall switch is required.
Two-segment swing arm
11.8″ + 7.9″ arm folds flat or swings out to about 19.7″ / 50cm.
Inline cord switch
An on/off switch on the 59″ / 150cm cord, within easy reach.
Plug-in, easy install
Plugs into a standard outlet — ideal where there is no wall wiring.
Black
Orange
Cherry Red
| Shade | Ø 9.8″ x H 7.5″ / Dia 25cm x H 19cm |
| Arm | 11.8″ + 7.9″ / 30cm + 20cm · reach about 19.7″ / 50cm |
| Baseplate | W 2.4″ x L 9.8″ / W 6cm x L 25cm |
All three colors share the same dimensions · click to enlarge
| Material | Iron, glossy enamel paint |
| Body Finish | Black, Orange, or Cherry Red |
| Shade Finish | Matching painted iron cone |
| Light Source | E27 bulb base · warm white 2700–3000K LED recommended |
| Voltage | AC 110–240V |
| Control | Inline on/off switch on the cord |
| Power | Plug-in, 59″ / 150cm cord |
| Installation | Wall-mounted with screws · no hardwiring |
| Environment | Indoor, dry locations only |
| Best For | Bedsides, reading nooks, beside a sofa or armchair, hallways, guest rooms |
| Certification | Compatible with North America, Saudi Arabia, Europe, Australia Certification |
- Screw the baseplate to the wall within reach of an outlet — the cord is 59″ / 150cm long; route it neatly down the wall.
- Mount it about 51–59″ / 130–150cm from the floor beside a bed or armchair, and route the cord so the inline switch is easy to reach.
- Allow clearance for the arm — about 19.7″ / 50cm out from the wall at full reach, plus the Ø 9.8″ shade.
- Adjust the arm by hand; the joints hold position by friction. Don't force them past their natural range.
- Handle the sconce by the baseplate or arm, not the shade or cord — the enamel can chip if knocked.
- Wipe the painted finish with a soft, dry cloth.
Does it need an electrician?
No — this is a plug-in sconce. Screw the baseplate to the wall, plug the cord into a standard outlet, and use the inline switch on the cord. No hardwiring or wall switch is needed.
How does the swing arm work?
The arm has two segments — an 11.8″ / 30cm inner section hinged at the baseplate and a 7.9″ / 20cm outer section hinged at the shade. Each joint pivots independently and holds its position by friction, so you can fold the arm close to the wall or swing it out to about 19.7″ / 50cm.
How do I turn it on and off?
With the inline switch on the 59″ / 150cm cord. Route the cord so the switch sits within easy reach — for example beside the bed or armchair.
What bulb does it use?
One E27 bulb. A warm white 2700–3000K LED of about 400–600 lumens gives a comfortable reading light.
Which colors are available?
Black, Orange, or Cherry Red, all in glossy painted iron with the same dimensions.
If it is a product quality problem or transportation damage, we will provide free return and exchange services, ensuring a hassle-free experience for our customers. Read the full Return & Refund Policy; if your order arrives damaged, see what to do when you receive a damaged item (report within 72 hours) and our shipping & tracking guide.
Design with confidence: Vakkerlight 3D Lighting Design Service
Take the guesswork out of lighting design. Whether for residential or commercial spaces, our 3D Lighting Design Service lets you visualize and customize fixtures in a realistic 3D environment before you buy.
- Personalized solutions: custom arrangements tailored to your exact space.
- True-to-life 3D: see how your fixtures will look before installation.
- Expert support: 1-on-1 guidance from our design specialists.
Resources & support: visit the 3D Lighting Design Service page to learn more. Need 3D Max files or detailed product parameters? Email info@vakkerlight.com and our team will be happy to assist you.
Product cut sheets (Google Drive) →
Welcome to Vakkerlight’s 3D Services. We pride ourselves on offering comprehensive design support to meet all your lighting needs. If you require 3D drawings, CAD plans or space design services, our experienced support team is here to help — email info@vakkerlight.com.
