Curved Wood Linear Pendant Light
VKP1-26524-001
- In stock, ready to ship
A curved wood linear LED pendant in a warm walnut-color finish, built from two offset curved wood shells — an upper scoop and a lower rail — with the integrated LED tucked in the gap between them. Light washes up the inner curve and down onto the table, so you see a warm glow, not the diode. Three lengths — 47.2″, 59″, and 70.9″ — suit dining tables, kitchen islands, and pool tables, hung on an adjustable black cable.
If you have any questions about our products, please get in touch with us at info@vakkerlighting.com and we will reply to you within 24 hours.
Natural wood — every fixture is one of a kind
Real wood grain, tone, and figure vary from piece to piece. The photos show a representative sample, not the exact fixture shipped — variation is a mark of real wood, not a defect.
Offset curved shells
An upper scoop and a lower rail in wood form a sculptural open profile over the table.
Hidden indirect light
The LED sits between the shells, washing the inner curve for soft, glare-free light.
Warm 2700K light
Integrated LED, 37W to 55W (2,960 to 4,400 lm) depending on length.
| Length | Size (L x W x H) | Power | Best for |
|---|---|---|---|
| 47.2″ | L 47.2″ x W 7.9″ x H 7.9″L 120cm x W 20cm x H 20cm | 37W · 2,960 lm | 4–6 seat tables, breakfast nooks |
| 59″ | L 59″ x W 7.9″ x H 7.9″L 150cm x W 20cm x H 20cm | 45W · 3,600 lm | 6–8 seat tables, kitchen islands |
| 70.9″ | L 70.9″ x W 7.9″ x H 7.9″L 180cm x W 20cm x H 20cm | 55W · 4,400 lm | 8+ seat tables, pool tables, long islands |
Pictured: 59″ fixture in walnut color on a black cable. Pick a length about 12″ shorter than your table so it clears each end — or email us your table size for a free recommendation.
Click any diagram to enlarge
| Material | Wood, metal |
| Body Finish | Walnut color · black cable |
| Shade Finish | Walnut-color curved wood shells with a recessed LED diffuser |
| Sizes | L 47.2″ x W 7.9″ x H 7.9″ / L 120cm x W 20cm x H 20cm L 59″ x W 7.9″ x H 7.9″ / L 150cm x W 20cm x H 20cm L 70.9″ x W 7.9″ x H 7.9″ / L 180cm x W 20cm x H 20cm |
| Light Source | Integrated LED · 2700K warm white |
| Power | 47.2″: 37W · 2,960 lm · 59″: 45W · 3,600 lm · 70.9″: 55W · 4,400 lm |
| Voltage | AC 110–240V |
| Control | Wall switch |
| Installation | Hardwired ceiling mount, adjustable black cable |
| Environment | IP20 · Indoor, dry locations only |
| Certification | Compatible with North America, Saudi Arabia, Europe, Australia Certification |
- Hardwired ceiling installation — a licensed electrician is recommended.
- Hang the fixture 30–36″ above a dining table; raise it for kitchen islands or walkways.
- The black cable adjusts at the canopy; feed excess cable into the ceiling box to level the fixture.
- For a sloped or vaulted ceiling, email us the pitch angle before ordering.
Is it bright enough to light a dining table?
Yes. The integrated LED runs the full length between the shells — 37W (2,960 lm) on the 47.2″, 45W (3,600 lm) on the 59″, and 55W (4,400 lm) on the 70.9″ — and casts light both up the inner curve and down onto the table, in warm 2700K.
What length should I choose?
Pick a fixture about 12″ shorter than the surface so it clears both ends. 47.2″ suits 4–6 seat tables, 59″ fits most 6–8 seat tables and islands, and 70.9″ covers 8+ seat tables and pool tables.
Does the open curved shape spread light, or only point it down?
Both. The upper scoop bounces light off its inner curve for soft ambient fill, while the open underside sends task light onto the table — with the LED hidden from direct view.
Can this mount on a sloped or vaulted ceiling?
The standard canopy suits flat ceilings. For a sloped or vaulted ceiling, email info@vakkerlighting.com with the pitch angle before ordering and we will advise on a suitable canopy.
Can I get a custom length?
Yes — we build to order. Email info@vakkerlighting.com with your table or island dimensions and we will recommend the best fit or make a custom size.
How do I care for the wood?
Dust the wood shells regularly with a soft, dry cloth. Real wood grain and tone vary from piece to piece.
Downloads
If it is a product quality problem or transportation damage, we will provide free return and exchange services, ensuring a hassle-free experience for our customers. Read the full Return & Refund Policy; if your order arrives damaged, see what to do when you receive a damaged item (report within 72 hours) and our shipping & tracking guide.
Design with confidence: Vakkerlight 3D Lighting Design Service
Take the guesswork out of lighting design. Whether for residential or commercial spaces, our 3D Lighting Design Service lets you visualize and customize fixtures in a realistic 3D environment before you buy.
- Personalized solutions: custom arrangements tailored to your exact space.
- True-to-life 3D: see how your fixtures will look before installation.
- Expert support: 1-on-1 guidance from our design specialists.
Resources & support: visit the 3D Lighting Design Service page to learn more. Need 3D Max files or detailed product parameters? Email info@vakkerlight.com and our team will be happy to assist you.
Product cut sheets (Google Drive) →
Welcome to Vakkerlight’s 3D Services. We pride ourselves on offering comprehensive design support to meet all your lighting needs. If you require 3D drawings, CAD plans or space design services, our experienced support team is here to help — email info@vakkerlight.com.
