Paper Lantern Floor Lamp
VKT04-2669-04
- Standard Shipping to the United States
- Warranty Coverage Available
- 60-Day Return and Exchange Policy
- Customer Support by Email & Phone
- Personalized Customization Available
- Available in Region-Specific Electrical Options
- In stock, ready to ship
A pair of paper floor lanterns built on the same slim wire tripod base — a cream rice-paper shade stretched over a bamboo-rib internal frame, capped by a warm terracotta-orange ring at the top with a wire handle, and seated above three black-steel legs. Choose between two shapes at the same H 23″ (58.5 cm) height: a wider Rounded form for a generous octagonal silhouette, or a narrower Angular form with a pinched diamond profile. Both ship with a 5W warm-white LED bulb included. A quiet sculptural floor light for a living room, study, or bedroom.
Rice-paper shade
Soft rice paper (washi) stretched over a faceted form — translucent and warm when lit.
Bamboo-rib frame
Slim bamboo ribs run horizontally inside the shade — visible as fine ridges across the paper.
Wire tripod base
Three slim black-steel legs splay outward for a stable, minimal floor stand.
| Shape | Top diameter | Height | Silhouette |
|---|---|---|---|
| Rounded | ∅ 31.5 cm (12.4″) | 58.5 cm (23″) | Wider, generous octagonal |
| Angular | ∅ 26.5 cm (10.4″) | 58.5 cm (23″) | Narrower, pinched diamond |
Use LED bulbs only — paper shade is heat-sensitive
Never use incandescent or halogen bulbs in this fixture. The rice-paper shade and bamboo ribs are flammable and cannot safely absorb the heat of a traditional bulb. Both shapes ship with a 5W warm-white LED bulb; replacements should also be LED only, at or below 7W. If the bulb feels warm to the touch in normal use, switch to a lower-wattage LED. Always switch off and let the bulb cool before changing it.
5W warm-white LED bulb included
One E27 (Edison screw) socket per lantern, fitted with a 5W warm-white LED bulb in the box — no need to source one yourself. Replacements should be LED only, at or below 7W, in any warm-white color temperature (2700–3000K matches best with the warm shade and orange terminal rings).
Cream rice paper, terracotta-orange rings, black tripod
A single finish offered in both shapes — cream rice-paper shade with visible bamboo-rib ridges, warm terracotta-orange terminal rings at top and bottom, and a slim wire handle. The tripod base is matte-black steel. Each shade is hand-finished, so the exact tone of the paper and the rib spacing shift subtly between pieces. For project quantities, email us before ordering.
Official dimension sheets for both shapes. Click to enlarge.
| Dimensions — Rounded | ∅ 12.4″ × H 23″ (∅ 31.5 × H 58.5 cm) |
| Dimensions — Angular | ∅ 10.4″ × H 23″ (∅ 26.5 × H 58.5 cm) |
| Base footprint (both) | 10.6″ (27 cm) leg span |
| Material | Rice paper (washi) shade, bamboo ribs, painted-steel tripod, painted-metal terminal rings |
| Color | Cream rice paper, terracotta-orange rings, matte-black tripod |
| Light source | 1 × E27 socket · 5W warm-white LED bulb included |
| Bulb replacement | LED only, ≤ 7W — never incandescent or halogen |
| Cord | Approx. 6 ft plug-in cord, in-line cord switch |
| Voltage | 120V (AC 110–240V global) |
| Mount | Free-standing, indoor dry locations only |
| Suitable spaces | Living room, study, bedroom |
| Certification | Listed · North America · CE · SAA · SASO · KC |
- Unpack carefully — the paper shade is fragile and can tear or dent if knocked against the box edge. Lift the lantern by the wire handle or by the bottom ring, never by the paper.
- Set the tripod on a flat, stable surface. Splay the three legs evenly until the lantern sits level.
- Install only the included 5W LED bulb, or an LED replacement at or below 7W. Never use incandescent or halogen bulbs — the paper shade cannot tolerate the heat.
- Plug into a standard outlet; use the in-line cord switch on the cable to turn the lamp on and off.
- Keep the lantern indoors in dry locations — paper absorbs moisture and humidity can warp or stain the shade. Not suitable for bathrooms, covered porches, or outdoor use.
- Keep curtains, bedding, and other fabrics at least 30 cm (12″) from the shade as a general fire-safety precaution.
- Dust the shade gently with a soft, dry brush or a feather duster — never use water, solvents, or sticky lint rollers on the paper.
- If the paper tears, small repairs with archival rice-paper patches and PVA glue are possible; email us for repair guidance.
Which shape and which room?
Both shapes share the same H 58.5 cm height. The Rounded form at ∅ 31.5 cm reads more generous and sculptural — best beside a sofa or in an open corner where it has room to be seen. The Angular form at ∅ 26.5 cm has a slimmer footprint and a sharper, pinched silhouette — better in a narrow corner, beside a bed, or in a study where space is tighter. Both throw a soft warm glow through the rice paper as ambient or accent lighting, not direct task light.
What bulb does it use, and can I change it?
The lantern uses a standard E27 (Edison screw) socket and ships with a 5W warm-white LED bulb already in the box. You can replace the bulb with any LED at or below 7W in a warm-white color temperature (2700–3000K matches the paper tone best). Never fit an incandescent or halogen bulb — those generate dangerous heat for the paper shade and bamboo ribs.
Will the paper yellow, tear, or look exactly like the photos?
The shade is rice paper (washi) on bamboo ribs — a natural, fibrous material. The exact tone of cream, the rib spacing, and small wrinkles or hand-finishing marks shift subtly between pieces; the photo is representative. Rice paper does yellow gradually with time and UV exposure, which is part of how the material ages. Keep out of direct sunlight to slow this. Small tears can be patched with archival rice-paper repair kits.
How do I clean it?
Dust the shade gently with a soft, dry brush or a clean feather duster, in the direction of the bamboo ribs. Never use water, soap, solvents, or sticky lint rollers on the paper — paper absorbs moisture, which can warp or stain the shade permanently. Wipe the metal rings and tripod legs with a dry microfiber.
What is the warranty?
Both shapes carry a 2-year warranty against manufacturing defects in the wiring, socket, switch, and frame. Email support with your order number if anything arrives damaged or fails in normal use. Paper aging (yellowing, fiber changes) and small variation in rib spacing or paper tone are part of the natural material and not covered as defects.
If it is a product quality problem or transportation damage, we will provide free return and exchange services, ensuring a hassle-free experience for our customers.
Vakkerlight offers an innovative 3D Lighting Design Service that brings a new level of customization to your lighting experience. Whether you're designing for a home, office, or commercial space, this service allows you to visualize and tailor lighting fixtures to your specific needs in a realistic 3D environment. With this service, Vakkerlight provides:
- Personalized Lighting Solutions: You can work with their design team to create custom lighting arrangements that suit the exact dimensions and style of your space.
- Detailed Visualization: The 3D service enables you to see how different lighting options will look in your room, giving you confidence in your selections before installation.
- Enhanced Customer Support: Vakkerlight’s design experts guide you through the process, offering suggestions and solutions based on your preferences and space requirements.
This service helps take the guesswork out of lighting design, ensuring that you select the perfect lighting fixtures for your home or business.
For more information, you can visit the official Vakkerlight 3D Lighting Design Service page.
For access to 3D Max files or detailed product parameters, kindly reach out to our support team at info@Vakkerlight.com. They will be more than happy to assist you.
