Umbrella Stand Coat Rack
VKC-2669-01
- Standard Shipping to the United States
- Warranty Coverage Available
- 60-Day Returns on Eligible Items
- Customer Support by Email & Phone
- Personalized Customization Available
- Multiple Shipping Options Available
- Safe and Secure Payments
- Available in Region-Specific Electrical Options
- In stock, ready to ship
A floor-standing iron coat rack with an open umbrella holder section at the base — ball-tip hooks branch outward from the top of a tall painted-iron post, all anchored on a weighted black disc base for stability. ∅ 14.6″ × H 66.1″ (D 37 × H 168 cm), with a 13″ (33 cm) base disc and a 8.7″ (22 cm) umbrella section. Available in three two-tone colors — a colored post with matching ball-tips on a black base: Red & Black, Green & Black, or Orange & Black. Sized for an entryway, mudroom, hallway, or beside the front door.
Ball-tip hooks
Hooks branch outward from the top for coats, jackets, scarves, hats, and light bags.
Umbrella holder
An open section near the base holds umbrellas upright — keep them ready beside the door.
Weighted disc base
33 cm black iron disc anchors the post against tipping when loaded with coats.
Each SKU has a colored upper post with a matching ball-tip hook color, anchored on a black painted-iron base. Swatches above are approximate digital representations; actual painted iron may shift slightly with lighting and your screen.
Place on hard flooring — wet umbrellas drip
The umbrella section is an open holder, not a sealed drip tray. Water from wet umbrellas runs down onto the iron base and the floor below. Place the rack on tile, stone, or sealed wood — avoid carpet, rugs, or unfinished wood, where dripping water can stain or warp the floor. If your area sees regular rain, slide a small absorbent tray or boot mat (10–12″) under the umbrella section. Dry the iron base promptly after damp use to keep the painted finish in good shape over time.
Two-tone painted iron
Each rack is finished in two painted-iron colors — a colored upper post and ball-tip hooks, anchored on a black painted disc base. The paint is a smooth enamel, durable in normal use but susceptible to chipping if knocked hard against a wall corner or a doorway. Touch-ups with a small bottle of matching enamel paint are possible. For project quantities or a custom-color order, email us before ordering.
Official dimension sheet. All three colors share the same dimensions. Click to enlarge.
Click to view full size ↗
| Dimensions | D 14.6″ × H 66.1″ (D 37 × H 168 cm) |
| Base disc | ∅ 13″ (33 cm) |
| Umbrella section | 8.7″ (22 cm) open holder |
| Colors | Red & Black · Green & Black · Orange & Black (painted iron) |
| Material | Painted iron post, ball-tip hooks, and weighted disc base |
| Light source | None — this is a non-lighting furniture piece |
| Placement | Free-standing, indoor dry locations · hard flooring recommended |
| Intended use | Coats, jackets, scarves, hats, and light bags on hooks · umbrellas in the lower section |
| Assembly | Minor assembly: the post attaches to the base disc |
- Unbox carefully — the painted finish is durable but can chip if knocked against the carton edge or a doorway. Lift the rack by the post, not by the hooks.
- Assemble the base to the post per the included guide. Hand-tighten the connection until snug; over-tightening can deform the threads.
- Place on a flat, level floor — the weighted disc base keeps the post stable, but only on level ground. Check that the floor is level before loading the hooks.
- Avoid carpet, rugs, or unfinished wood floors — wet umbrellas can drip onto the base and the floor below, causing stains or warping over time. Tile, stone, or sealed wood is safer.
- If rainy days are common, slide a small absorbent tray (about 10–12″) under the umbrella section to catch drips.
- Don't overload the hooks — designed for typical coats, jackets, scarves, and light bags. Loaded backpacks or wet outerwear add weight quickly and may tip the rack despite the weighted base.
- Wipe the iron with a soft, dry cloth as needed. Dry the rack promptly if it gets wet from umbrellas. For paint touch-ups on small chips, a matching enamel paint (available at hardware stores) blends in well.
- Indoor dry locations only — not rated for outdoor, covered porch, or damp basement use, where humidity can rust the painted iron over time.
Where in my home does it fit best?
Entryway, mudroom, hallway, or beside the front door — anywhere coats and umbrellas need a home as you come inside. At 168 cm (66″) tall and only 37 cm (15″) wide, it tucks into a narrow strip of wall without taking much floor space. The umbrella section is open at the front, so leave a few inches of clearance to slide umbrellas in and out.
Will the umbrella section damage my floor?
It can if you're not careful. The umbrella holder is an open section, not a sealed drip tray, so water from wet umbrellas runs down onto the iron base and the floor below. Place the rack on tile, stone, or sealed wood — avoid carpet, rugs, or unfinished wood. If rainy days are common where you live, slide a small absorbent tray (10–12″) under the umbrella section to catch drips. Dry the iron base promptly after damp use to keep the painted finish intact.
How many coats can it hold? Will it tip over?
The hooks are designed for typical coats, jackets, scarves, hats, and light bags. The weighted black disc base anchors the post against tipping when loaded normally. Avoid hanging loaded backpacks, wet heavy outerwear, or anything that swings — those add weight unevenly and can pull the rack off balance. If you keep the load on the hooks balanced (not all on one side), it stays steady.
How do I care for the painted iron?
Wipe with a soft, dry cloth as needed. Dry the rack promptly if it gets wet from umbrellas — standing moisture can dull the painted finish over time and, if the paint chips, the exposed iron can rust. Small chips on the painted finish can be touched up with a matching enamel paint (available at hardware stores). Avoid abrasive cleaners and solvents, which can soften the enamel.
What is the warranty?
The coat rack carries a 2-year warranty against manufacturing defects in the welds, hardware, and painted finish under normal indoor use. Email support with your order number if anything arrives damaged or fails in normal use. Minor scratches or chips from impact, rust from prolonged wet exposure, or paint variation from touch-ups are not covered.
If it is a product quality problem or transportation damage, we will provide free return and exchange services, ensuring a hassle-free experience for our customers.
PRODUCT CUT SHEET
Design with Confidence: Vakkerlight 3D Lighting Service
Take the guesswork out of lighting design. Whether for residential or commercial spaces, Vakkerlight’s innovative 3D Lighting Design Service lets you visualize and customize fixtures in a realistic 3D environment before you buy.
- Personalized Solutions: Custom arrangements tailored to your exact space.
- True-to-Life 3D: See how your fixtures will look before installation.
- Expert Support: Get 1-on-1 guidance from our design specialists.
Resources & Support:
Visit our [3D Lighting Design Service page] to learn more. Need 3D Max files or detailed product parameters? Email us at info@vakkerlight.com and our team will be happy to assist you.
